Identificador: 398
Abierta
Descripción
PARTE # 2-EX-ET-150 - TROMPO - MOTOR 7.5 HP - CON FLECHA DE 1-1/4"
PARTE # 2-EX-ET-160 - TROMPO - MOTOR 10 HP - CON FLECHA DE 1-1/4”
Nuevo con garantia
Engineered for continuous industrial use, the shapers are great machines for demanding applications. The large work area, reversable spindle, optional digital readout, and powerful motors ensure clean, safe and efficient production.
3 spindle speeds: 5.5, 7.5 and 10K RPM
Reversable
Magnetic starter
Precision fence assembly
Table inserts
Front access panel
Spindle lock
Micro adjust left and right positioning
Spindle brake
Emergency stop
Optional digital readout
| 2-EX-ET-150 |
Main Motor | 7.5HP |
Phase | 3 |
Spindle RPMs | 5.5/7.5/10K |
Table Size (in) | 46x34 |
Max Diameter Opening | 12-3/8" |
Spindle Travel | 6-1/2" |
Included Spindles | 1-1/4 Fixed |
3/4" Spindle (in) | *** |
1" Spindle (in) | *** |
1-1/4" Spindle (in) | 5-13/16" |
Included Collet Adapters | NA |
Interchangeable Spindles | No |
CFM Requirements | 750 |
Sliding Table Travel | NA |
Amps | 18 |
Weight | 1250 lbs |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 2EV-6100 - POSTFORMADORA CONTINUA 2 LADOS - EVANS 6100
PARTE: 2EV-6100 - POSTFORMADORA CONTINUA 2 LADOS - EVANS 6100220 Volt, 3 Ph., 60 Hz., or 380 Volt, 3 Ph., 50 Hz.17 kw (no air required) Standard work height 37”.Standard Features:90 and 180 degree setupQuick-change 90 and 180 degree roller assembles each side.Maximum material width 48"Heaters: Infrared radiant panel (instant on / off)Foot print: 107”L X 72”W X 44”H, Work height 37”Maximum Feed rate 10 feet per minute.Feed motor: ½ hp variable speed DC drive.Crated weight 2400 LBS. Shi...
AMXmachinery
ROUTER PIN INVERTIDO - CR ONSRUD 36210
PARTE: 12127 - ROUTER PIN INVERTIDO - CR ONSRUD 36210
USADO – EN BUENAS
CONDICIONES – LIMPIADO Y REVISADO
230V, 3 PH, 60 CY
10 HP motor, belt driven to spindle
25,000 RPM spindle speed
Pneumatic spindle and guide pin movement via foot
pedal
3" spindle travel
43" x 31" acrylic topped table
36" throat depth
3-Position adjustable depth stop, infinitely
adjustable
Maximum workpiece/template height is 4"
3/4" max. Chucking capacity
Magnetic starter with over...
-500x500.jpg)
AMXmachinery
REASERRADORA 3 SIERRAS 12"
PARTE # 2TA-BS-1212HR-3 - REASERRADORA HORIZONTAL - 3 SIERRASNUEVA CON GARANTIASpecificationsBS-1212HR-TNBS-1616HR-TNMax. Cutting Capacity12" x 12"16" x 16"Distance between Blade to Conveyor1/4" ~ 12"Saw Wheel Diameter28" x 2Saw Blade Length (Width)201" (2")201" (2" ~ 3")Saw Blade Speed6000 FPMFeed Conveyor Width12"16"Feed Speed (Variable)0 ~ 90 FPMMain Motor (Each Head)20 HP x 230 HP x 2Saw Blade Lift Motor1/2 HPFeed Conveyor Motor3 HPDust Hood4" x 6N. W.7200 LBS8600 LBSMachine was built with r...
AMXmachinery
PARTE: AMX-10161 - EXTRACTOR DE PARED - ASPAS DIAMETRO 19” - S & P
PARTE: AMX-10161 - EXTRACTOR DE PARED - ASPAS DIAMETRO
19” - S & P
USADO - MUY BUENAS CONDICIONES
BALEROS NUEVOS
MOTOR ½ HP, 110V, 1 FASE
RPM 1625
MARCA S & P
HECHO EN MEXICO
MEDIDAS 25” FRENTE X 25” ALTO X 12”
FONDO