Identificador: 1490
Abierta
Descripción
PARTE: 12285 – TROMPO CON ALIMENTADOR – 5 HP - POWERMATIC
USADO – BUENAS CONDICIONES
TS-80 / 9179083
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
SIERRA DE MESA - DISCO 10” - MOTOR 3 HP
PARTE: 12345-1 - SIERRA DE MESA - DISCO 10” - MOTOR 3 HP
- RIDGID
USADA - BUENAS CONDICIONES
-500x500.jpg)
AMXmachinery
TALADRO BASTIDORES - 2 BROCAS
PARTE: 2RT-R220T - TALADRO BASTIDORES - 2 BROCAS1.5 HP Spindle Drive Motor, TEFC1” Spindle CentersManual Controls, 110 V, TEFCFoot Actuated Boring CycleTooling included14 Degree Double Spindle1” Spindle Centers6,100 RPM Spindle SpeedBall Bearing Collet Guide Bushing Block24” X 30” Table AreaAdjustable Fence with (2) StopsDesigned and Manufactured in the USA Additional options:R220T3 – 1.5 H.P. 3-Phase 230/460 Volt
AMXmachinery
LIJADORA DE TAMBOR
PARTE # 2SM-72550 - LIJADORA DE 1 TAMBORES - 25”- 50” DE ANCHOSPECIFICATIONSSanding Capacity:Maximum Width (in): 50 (two passes)Minimum Length (in): 2-1/4Maximum Thickness (in): 4Minimum Thickness (in): 1/32Dimensions (in):46L x 27W x 53H (on stand)Drum:5 x 25 extruded aluminumDrum Speed:1740 RPMDust Hood:1- 4″ vacuum port, min. 600 CFM recommendedConveyor Motor:43 in.-lb. torque, direct drive D.C. motor, ranged variable 0-10 FPMDrive Motor (TEFC):1-3/4 HPPower Requirements110 V 20 ampShi...
AMXmachinery
TORNO COPIADOR – RANURADOR – CAPACIDAD 30” LARGO
PARTE:
2TA-CL-330S - TORNO COPIADOR – RANURADOR – CAPACIDAD 30” LARGO
Nuevo con garantíaFeatures:
Suitable for cutting straight and spiral
grooves for the straight shaped or tapered spindle.
The machine employs rotary air cylinder
incorporating with gear for accurate indexing of grooves.
The cutter carriage's forward and backward
movements are hydraulically operated with feed speed control providing a
smooth motion and stable cutting performance.
T...