Identificador: 2442
Abierta
ID de articulo : # 2442 se ha agregado a su lista de deseos.
Descripción
PART: 12565-E - DUST COLLECTOR - MOTOR 10 HP - BELFAB
USED - VERY GOOD CONDITION
Main Motor: 10 HP, 230/460v, 3ph
Start/Stop Station for 230v, 3ph
Chip Collect in Two Lower Plastic Bags
Filtration Surface (sq.ft): 331.63
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
SOLDADORA DE MADERA - ALTA FRECUENCIA
PARTE: 2TE-0001 – SOLDADORA DE MADERA – ALTA FRECUENCIANuevo con garantíaFeatures:Weight150 lbsDimensions66 × 43 × 44 cmSupply240 volt / 50hz (standard 13-amp 3-pin plug)Generator frequencyNominal 27.2 MhzCuring speed3 – 10 seconds per weldPenetration50mm effectiveOutput0.5 – 0.6 amps at 2400 volts (internal HT) on loadFinishHardwearing powder coated finishElectrical SafetyCabinet and fittings are fully earthed. Cutout switch isolates main power if rear access panel is removed. 10 amp...
AMXmachinery
SIERRA ESCUADRADORA - PAULONI S-300
PARTE: 12259 - SIERRA ESCUADRADORA -
PAULONI S-300
USADA - MUY BUENAS CONDICIONES
MFG. 2007
11 HP *8.5 KW) 220V, 3 FASES, 27.5 AMP
PESO: 430 KG
AMXmachinery
PARTE: AMX-12490 - EXTRACTOR DE TURBINA - DAYTON
PARTE: AMX-12490 - EXTRACTOR DE TURBINA - DAYTONUSADO - MUY BUENAS CONDICIONESBALEROS NUEVOSMedidas totales: 25” ancho x 17”
fondo x 20” altoEntrada redonda: 7”Salida redonda: 5”
Motor: 3 HP, 230/460V, Amp 8.2/4.1,
RPM 3490, Marca Dayton Video: https://vimeo.com/870516485
AMXmachinery
TALLADORA DE MADERA
PARTE: 2CA-CM-8CAR - TALLADORA DE MADERAFeatures:Special design 3D carving machine by menu copy with template for wood, artistic, and plastic, etc.Fix the template at middle axis, the other 8 axis spindle will follow it and carving the material when it is automatic rotated 360 degrees.The spindle motor controlled by high frequency inverter from 9,000 to 12,000 RPM for best carving effects.Cutter head can be adjusted at x or y direction.Carving angle can be adjusted at 30 to 120 degrees.Custom o...