Identificador: 1007
Abierta
ID de articulo : # 1007 se ha agregado a su lista de deseos.
Descripción
PARTE # 12161 – PEGADORA DE SABANAS - FISHER RÜCKLE
USADA – MUY BUENAS CONDICIONES
Year of manufacture 1993
Opening width mm 2.850
Veneer thickness min mm 0,4
Veneer thickness max mm 2
Strip width min mm 70
Strip width max mm 430
Width of lifting table mm 430
Feedrate max m/min 24
Gluing aggregate Yes
Cross splicing machine Yes
Lift table Yes
Trimming unit Yes
Joint Only edge gluing
Operating status dismantled/ stored
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.jpg)
AMXmachinery
MAQUINAS PARA CHAPAS Y ENCHAPADOS - LOTE 2
MAQUINAS PARA CHAPAS Y ENCHAPADOS - LOTE 2USADAS - BUENAS CONDICIONES - EN VENTA EN MEXICOPARTE: 11720 - TORNO DESENROLLADOR - ANCHO 54”PARTE: 11721 - TORNO DESENROLLADOR - ANCHO 100”PARTE: 11722 - SECANTE DE CHAPA - 3 CAMASPARTE: 11723 - SECANTE DE CHAPA - 2 CAMAS - EN FABRICACIONPARTE: 11724 - CALDERA DE 150 HP A BASE ASERRINPARTE: 11725 - MESA VERDE PARA TORNO DE 8 PIESPARTE: 11761 - SLICER - REBANADORA - 8 PIES DE LARGOPARTE: 11726 - AFILADORA DE CUCHILLASPARTE: 11758 - PARCHADORA RAINMA...
AMXmachinery
BASE NEGRO BRILLANTE
PARTE: P-SOL-N-002 - BASE COLOR NEGRO BRILLANTE5/8” espesor1 ranura vertical y 1 ranura horizontal por atras Medidas: 5 x 7" 6 x 8" 7 x 9" 8 x 10" 9 x 12" 10.5 x 13"
AMXmachinery
PARTE: 12572 - PRENSA DE RADIO FRECUENCIA - OGDEN
PARTE: 12572 - PRENSA DE RADIO FRECUENCIA - OGDEN
USADA - BUENAS CONDICIONES
Curing
area: 36” x 60” x 2” thick.
Clamping
pressure is applied by multi-power (dual pistons on a common shaft) pneumatic
cylinders to maximize pressure while relying on standard plant pressures.
Unlike presses without multi-power cylinders, which require booster
compressors, the Model SL36x60 reaches full capacity at 100-psi plant air
pressure.
Edge
pressure is applied by eight (8) each pusher ...
AMXmachinery
CENTRO DE MAQUINADO
PARTE # 2MA-949VPKG - CENTRO DE MAQUINADONUEVO CON GARANTIAStandard Features: - Taiwan Mill- “Meehanite” Casting- “Turcite B” Coating on X/Y ways- ISO 9001 certified- Coolant system included- GMM-949V has variable spindle speeds from 70-4,300 rpm - Heavy duty 3 HP AC spindle motor, 3 phase ( for ideal of tapping jobs, we strongly recommend to take 3 phase mill with phase converter for single phase conversion )- Heavy Duty “Meehanite” casting- Hardened & ground dovetail guideways- ...