Identificador: 1056
Abierta
ID de articulo : # 1056 se ha agregado a su lista de deseos.
Descripción
PARTE: 12061 - COMPRESOR DE TORNILLO - 50 HP - INGERSOLLRAND
Mgf: 2006
212 ACFM @ 125psi
Remanufactured Airend with only 600 hours on it
(95,000 Total Hours on unit)
Annual PM performed 600 hours ago
460 volt Aircooled Unit / Original Motor
30-day Full Package Warranty
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
POSTFORMADORA CONTINUA 1 LADO
PARTE # 2EV-6000 - POSTFORMADORA CONTINUA 1 LADO - EVANS 6000220 Volt 1 phase, 220 volt 3 phaseStandard Features:Floating Laminate Trimmer (conventional router)Three phase machines require a separate 110 connection Quick-change 90 and 180 degree roller assembles.Infrared radiant panel heater (instant on / off)Foot print: 130”L X 36”W X 50”HMaximum Feed rate 15 feet per minute.Feed motor: 1/3 hp variable speed DC drive.Crated dimensions 125 x 40 x 60Created weight 1750 LBS....
AMXmachinery
SIERRA CINTA – AUTOMATICA – CAPACIDAD 16.5”
PARTE: 2AA-HA400W – SIERRA CINTA –
AUTOMATICA – CAPACIDAD 16.5” - AMADA
NUEVA
CON GARANTIA
Machine
Specifications
Cutting
Capacity Round (Diameter) 1.18"-16.54"
Rectangle
(W x H) 16.3" x 16.3"
Work
Load Capacity 5,511 lbs.
Material
Index Stroke 19.6" (Maximum 9 times index)
Index
Length 0.394" - 177"
Saw
Blade Dimensions (L x T x W) 15' x 0.050" x 1-1/2"
Blade
Speed 56-295 ft./min, 60 Hz, Step less
Saw
Blade Motor 7.5 HP
Hydraulic
Pump Motor 2...
AMXmachinery
PARTE: 12269 – MONTACARGAS – 5,000 A 6,000 LBS - CATERPILLAR
PARTE: 12269 – MONTACARGAS – 5,000
A 6,000 LBS - CATERPILLAR
USADO
- BUENAS CONDICIONES
RODADA 10 ATRÁS
RODADA 12 ENFRENTE PARA TERRACERIA
MOVIMIENTO LATERAL DE CARGA
TORRE LEVANTE 3 SECCIONES
GAS LP
-500x500.jpg)
AMXmachinery
CLAVADORA NEUMATICA PARA TARIMAS
PARTE # SIL-DC-AT3092 - CLAVADORA NEUMATICA PARA TARIMASNUEVA CON GARANTIALONGITUD DE CLAVO: DESDE 1-3/4" HASTA 2-3/4"90-110 PSI, 6-8 CFM, 168-220 LTS/MIN