Identificador: 1069
Abierta
ID de articulo : # 1069 se ha agregado a su lista de deseos.
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
Descripción
PARTE: 12106 – MOLDURADORA – 5 CABEZALES – WEINIG PROFIMAT 26
Usada – Muy buenas condiciones
Weinig Moulder and Grinder package
Working capacity: 9-1/16” x 4-3/4”
Spindles Configuration: B-R-L-T-T-B
Motors: Bottom 10 HP, Right / Left 10 HP, Top 15 HP, Top 20 HP and Bottom 10 hp.
Spindles: Dia. 1 1/2" with rotation at 6,000 RPM. Digiset readouts for left and top spindles. Readouts on chipbreaker and hold down. Weinig ATS -E for left and top radial positioning.
Feed: Variable speed 4 HP with feed speeds from 18-85 FPM.
Infeed/Tables: 2 M (6’6’) infeed with side pressure roller. Chromed tables Manual table lubrication pump.
Note: Manuals, 5 heads, measuring stand.
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
ESPIGADORA 1 LADO - FINGER JOINT
PARTE: 2TA-SET-60 - ESPIGADORA 1 LADO - FINGER
JOINTFeatures:It performs cut off, burrs trimming, and moulding
functions.Two 4" D x 5" L max. tenon cutters, cope spindle
accepts general shaper cutter. Suited for cutting tenons, finger joints for
window or doorframe and general joint-tenon.Hand, manual operated clamping and feeding of stock.First the trim saw to cut off the end of stock evenly.Then two moulding, tenon spindles are mounted at the rear
of saw enable machine performs edge moul...
AMXmachinery
ESPIGADORA DOBLE DE CADENA - SCM
PARTE:
12040 – ESPIGADORA DOBLE DE CADENA - SCM
EN BUENAS CONDICIONES DE OPERACIÓN
MOTORES 220/440V 3 FASES, CONECTADA A 220V 3 FASES
SIERRA CORTE A LARGO
PERFILADOR ARRIBA
PERFILADOR ABAJO
AMXmachinery
LIJADORA DE BANDA ANCHA – 36” ANCHO – 1 BANDA – TIMESAVERS
PARTE: 12219 – LIJADORA DE BANDA ANCHA
– 36” ANCHO – 1 BANDA – TIMESAVERS
USADA – BUENAS CONDICIONES
0
to 8" thickness capacity, (manually adjusted via handwheel)
20
HP, 230/60/3 combination 4" diam. drum & platen sanding head
(60
- 65) durometer rubber covered contact drum
1
HP, 230/60/3 feed conveyor motor
(15
to 45 ft/min.) variable conveyor feed via variable speed pulley
24"
infeed & 8" outfeed conveyor, (4 jack screws for raise & lower)
Automatic
...
AMXmachinery
POSTFORMADORA
PARTE # 2EV-0190 - POSTFORMADORA - 12 PIES LARGO 1 LADO - EVANS 0190Para hacer dobles para Back Splash- 110V, 1 phase, 15 amps- 220V, 1 phase, 8 amps- Air: 80 PSI - 12' maximum capacity (3660 mm)- Back Splash Height: Minimum 1" (25 mm), Maximum 34" (860 mm) - Possible coving radios: 1/8" (3 mm) , 3/16" (5 mm), 3/8" (10 mm)- Crated weight 1800 LBS. - Shipping dimensions 182” long X 34” wide X 50” high- Bends inside cove bends for back splashes. The 0190 is available with either...