Identificador: 1171
Abierta
ID de articulo : # 1171 se ha agregado a su lista de deseos.
Descripción
PARTE: 2FA-RE6X12 - REASERRADORA HORIZONTAL – 1 SIERRA – ANCHO 12”
NUEVA CON GARANTIA
The widest cutting resaw available in our line of products.
If your looking for a low cost solution to cutting up to 12" wide material, look no further.
These saws are equipped with 20HP motors and 10" wide conveyor belts.
Standard Features
Air Tensioned Blade System
Enclosed Hydraulic System
Easy Height Adjustment
Machine Specs
Dimensions
Length: 84"
Width: 84"
Height: 48"
Feed Belt Height: 34"
Power
20 HP Electric Motor: 208/230/480/3/60 TEFC
Completely pre-wired motor starter with start/stop buttons and circuit overload protection
Specifications
4" Dust Connection (400 cfin)
Approx. 1500 lbs
Uses 15'1" Bands (3/4" to 1-1/4" Wide)
Top Mounted Roller Hold Down
Heavy Duty 2-7/16" Arbors & Bearings
20" Band Wheels
Self Contained Hydraulic System with Variable 0-120 Feed Per Minute Feed Speed
3" Tall Right Side Fence
Capacities
Board Width: up to 12"
Board Thickness: 1/4" - 6"
Board Length: Unlimited
Options
Power Options
22 HP Honda Gas Motor
30 HP Kubota Diesel Motor
Line Shaft: Available Without Power Set to Run off Line Shaft
Single Phase 10 HP
Machine Options
Taller Fences
Custom Conveyor Length
Powered Hold Down
Roller Guides
Larger Band Wheels
Air Tensioned Hold Over Plate
System Options
Tailing Belt
Guide Surfacing Machine
Cant Sizer
Merry Go Round Return
Green Chain
Shingle Belt
Infeed/Outfeed Powered Roller Case
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 1SL-DC-CH18F - TALADRO DE COLUMNA - MOTOR 1.2 HP - 110V, 1 FASE
PARTE:
1SL-DC-CH18F - TALADRO DE COLUMNA - MOTOR 1.2 HP - 110V, 1 FASENUEVO CON GARANTIAMOTOR: 1.2 HP, 110V, 60 Hz, 1 FASE12 VELOCIDADES: 340 - 2860 RPMCHUCK: 5 A 20 MM (3/4")DISTANCIA DEL CHUCK A COLUMNA: 175 MMCARRERA CHUCK: 85 MMDISTANCIA DEL CHUCK A LA MESA: 565 MMDISTANCIA DEL CHUCK A LA BASE: 1050 MMDIMENSIONES DE LA MESA: 285 X 285 MMDIMENSIONES TOTALES: 1140 MM X 500 MM X 300 MMPESO: 80 KGSEMPAQUE: 1 CAJA* INCLUYE PRENSA DE 4"
AMXmachinery
CEPILLO 2 CARAS - CAPACIDAD ANCHO 24”
PARTE:
12330 - CEPILLO 2 CARAS - CAPACIDAD ANCHO 24”
USADO - BUENAS CONDICIONES
AMXmachinery
RACK PARA PRENSA TABLEROS - 6 PIES LARGO
PARTE: 2TY-79F-6 - RACK PARA
PRENSA TABLEROS - 6 PIES LARGONUEVA CON GARANTIA8 Prensas con altura de 3-1/2”
y 40” aberturaAjustador de las prensas manual (5) total gluing levelsIncludes (8) 3 1/2″ High Jaw 40″ opening clamps
(52″ Clamps Available upon Request)Innovative, Space Saving Feature that allows the
Clamps to be hung Vertically when not in useEdge Glue and Face Glue a variety of solid wood
components100% steel tubular construction that Creates a
Flat and Even Work Area f...
AMXmachinery
POSTFORMADORA CONTINUA 1 LADO
PARTE # 2EV-6000 - POSTFORMADORA CONTINUA 1 LADO - EVANS 6000220 Volt 1 phase, 220 volt 3 phaseStandard Features:Floating Laminate Trimmer (conventional router)Three phase machines require a separate 110 connection Quick-change 90 and 180 degree roller assembles.Infrared radiant panel heater (instant on / off)Foot print: 130”L X 36”W X 50”HMaximum Feed rate 15 feet per minute.Feed motor: 1/3 hp variable speed DC drive.Crated dimensions 125 x 40 x 60Created weight 1750 LBS....