SIERRA CINTA – CAPACIDAD 28”

PARTE: 2AA-8-MARK-II - SIERRA CINTA – CAPACIDAD 28” – AMADA

NUEVA CON GARANTIA

SPECIFICATIONS & FEATURES

Rectangular Capacity               Standard Capacity                                  M6 High Column Capacity (Optional)

Blade at 90°                              18” x 22” (457 mm x 560 mm)                18” x 28” (457 mm x 711 mm)

Blade at 45°                              18” x 12.75” (457 mm x 324 mm)            18” x 17” (457 mm x 432 mm)

Speed Range

50 – 450 fpm (15 – 137 m/min) infinitely variable speed drive system.

Front-Mounted Speed Control

Allows blade speed to be adjusted from operator’s control station.

Feed Range

0 – 140 lbs. (64 kgf) infinitely variable direct reading scale balance beam.

T-Slotted Work Table

Work area 24.25” x 33” (616 mm x 838 mm); table height 34.5” (876 mm); four machined T-slots accept .625” (15.5 mm) T-Bolts.

Miter Cutting

Column and blade tilt up to 45° right and left of vertical; work always stationary. Built-in protractor.

Quick-Action Vise

Maximum opening 18” (457 mm). Jaws can be shifted to either right or left side of blade. Jaws are 6” (152 mm) high, 12” (305 mm) wide.

Saw Feed Stops

Adjustable stops can be pre-set to stop advance of the saw head and return of blade and to stop motor at any location within the 18” (457 mm) travel of the blade.

Coolant System

Built in with Flood system, available with added optional drop lubrication system. (Requires compressed air connection - Option Code ML2). Controlled by on-off selector switch at operator’s station. Tank capacity 21 gallons (79 liters).

Flushing Hose

Washes chips from hard-to-get-at places reducing clean-up time.

Power Chip Brush

Together with blade wipers and flood coolant keep blade teeth free of chips.

Carbide Guide System

Guides are stationary and can be rotated to present new guiding surface to the blade. Upper and lower guides have preloaded carbide-faced back-up blocks to support back edge of the blade.

Blade

14' 6" (4420 mm) long x 1" (25 mm) wide, .035" (89 mm) thick. One Welded-Edge Band Blade is furnished with each machine.

Motors

Main; 5 H.P. (3.75 kW), 1800 RPM, totally enclosed fan cooled. Coolant Pump; 1/8 H.P. (.1 kW) totally enclosed motor-built-in integrally. Available voltage: 208-volt, 230 volt, 460, 3-phase.

Controls

IEC fused disconnect switch and magnetic motor starters, with overload and low voltage

protection. Disconnect is NFPA79 compliant. Transformer provides low voltage control

(120 Volts) to all push buttons at operator’s control panel and machine lighting circuits.

Electrical and control components mounted in a NEMA 12 compartment. Electrical

Panel is UL labeled #E56388.