Identificador: 123
Abierta
ID de articulo : # 123 se ha agregado a su lista de deseos.
Descripción
PARTE: 1SL- DC-WP20HD-75 – CEPILLO - USO RUDO - 20” ANCHO - MOTOR 7.5 HP
Nuevo con garantia
Motor: 7.5 H.P., 220 V., 60Hz, 3 fases
Máx. profundidad de corte: 1/8”
Capacidad de corte: 20” x 8 1/2”
Tamaño de la mesa: 20” x 28”
Velocidad del cabezal: 5000 rpm
Velocidad de alimentación: 20 y 30 pies/min
Cantidad de cuchillas: 4 piezas
Peso de la máquina: 420 kg.
Tipo de empaque: 1 caja
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
SIERRA TRONZADORA – 7.5 HP - DISCO 14" - IZQUIERDA
PARTE: 12347 - SIERRA TRONZADORA – 7.5 HP - DISCO 14"
- IZQUIERDA
USADA
- BUENAS CONDICIONESMotor 7.5 HP, 220V, 3 phase4100 RPM arbor speedLeft Hand Model uses a 14” diameter saw blade with 1” boreCuts boards up to 1” x 10” or 2”x 9”, 3” x 8” at a rate of up to
95 strokes per minuteStandard full coverage safety guardTable size is 25” x 23-1/4” with a table height of 32-3/4”Requires 600 CFM air supply, and has a 4” diameter dust portMachine weighs 530 lbsOverall di...
AMXmachinery
PARTE: 12597 - TRITURADORA - BLOAPCO - MODELO 7-6
PARTE: 12597 - TRITURADORA - BLOAPCO - MODELO 7-6USADO – BUENAS CONDICIONES - RECONSTRUIDOMax trim width 7.5"Shear Cutting ActionRotor Speed 500 to 3,600 rpm1 HP motorModel 7-6 provides cutting via one stationary bed knife and two rotating knives provides two cuts per revolution. The open-rotor design facilitates free passage of air and material. Shear-cut action for paper and tough, thin film and foil. Total weight is 135 pounds17"L x 13.25W x 22.5H
AMXmachinery
TALADRO BASTIDORES - 1 BROCA
PARTE: 2RT-R200T - TALADRO BASTIDORES - 1 BROCA1.5 HP Spindle Drive Motor, TEFCManual Controls, 1-Phase, 110 V, 60 HzFoot Actuated Boring Cycle14 Degree Single Spindle6,100 RPM Spindle SpeedBall Bearing Collet Guide Bushing Block24” x 30” Table AreaAdjustable Fence with (2) StopsTooling IncludedDesigned and Manufactured in the USAAdditional options for this machine include:R200T3 – 1.5 HP 3-Phase 230/460 VoltHis machine is part of the R200 assembly system that includes the R200E/A and is s...
AMXmachinery
HORNO PARA CERAMICA, VIDRIO, METALES – 19 LITROS
PARTE:
2PG-FUSION7 - HORNO PARA CERAMICA, VIDRIO, METALES – 19 LITROSNUEVO CON GARANTIAThe digital Sentry Xpress 3 key controller comes standard on all Fusion-series kilns. Control both heating and cooling with simple 3-key operation.The Sentry Xpress 3-key controller is packed with features. It includes two modes: Single Speed and 8-segment Ramp-Hold.Features of the Sentry Xpress 3-key Controller on Non-Ceramic Paragon KilnsDesign programs with up to 8 segments (steps) in Ramp-Hold mode.Fire...