Identificador: 1336
Abierta
ID de articulo : # 1336 se ha agregado a su lista de deseos.
.png)
.jpeg)
LIJADORA DE BANDA - MESA MOVIBLE – 2 BANDAS – MOTOR 5 HP - MESA 30”X 96” - USO RUDO
AMXmachinery
Descripción
PARTE: 2DO-PMC-HD2 – LIJADORA DE BANDA - MESA MOVIBLE – 2 BANDAS – MOTOR 5 HP - MESA 30”X 96”
USO RUDO
Nueva con garantía
Heavy duty welded structure. They feature dust hoods on both sides, a table with steel rollers and virtually wear free balanced and quiet running aluminum pulleys. All models are equipped with a magnetic starter (overload protection) and belt guards.
Maximum Part Length:
Pressure Pad Traveling Bar: 96"
Pressure Pad Traveling Bar Contact Wheel Assembly: 80"
Table size: 30" wide X 96" long
Steel table is covered with Russian Cherry wood plywood surface
Motorized vertical table with 28" vertical adjustment
Table weight capacity: 1000 lb
Two Abrasive Belt: 6" X 264", 4750 F.P.M.
Pulleys: 10" dia. X 6.25" face
Pressure Pad Traveling Bar
Hand Held Pressure Device
Magnetic starter with overload protection
Belt guards
Pneumatic tensioner
Sanding belt breaking detector
Dust collector outlet: 6" diameter @ 1200 cfm
Compressed air requirement: 90 psi
5 HP T.E.F.C. motor, 1750 rpm
Voltage: 220 or 440 / 3 / 60, 17 amps
OPTIONS
Single Phase 5 HP motor, 220 volts
Enlarge the table to 48"
Vulcanized Rubber Grooved Contact Wheel Assembly
- (for hairlining & fine graining)
Contact Wheel Assembly with Corrugated Stacked Disks
- (for weld seam removal & rough graining)
Variable speed for a 5 HP Motor:
- Allow belt speed between 3300 to 6300 ft./min.
Six (6) Vacuum cups with individual activation switch, to hold parts
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PERSONALIZADOR CON TARJETERO - GRABADO
PARTE: P-BASE-102-G - PERSONALIZADOR CON TARJETERO - MADERA SOLIDA - COLOR CAOBAMadera solidaRanura superior izquierda para colocar tarjetas de presentacion Medidas: 2.25 x 10"
AMXmachinery
OVER ARM ROUTER
PARTE # 2EV-2480 - OVER ARM ROUTER - EVANS 2480 - 220 Volt, 3 Phase, 10 amp- Standard Features:- 3 HP High frequency router motor- 80 PSI Required- 18,000 RPM- Working height 33"- Includes router bit Part # 08018- 30" x 48" cutting area- Crated weight 1500 LBS. Shipping dimensions 69” long X 72” wide X 65” highOptional:- 440 Volt, 3 Ph. 5 amp, 80 PSI
AMXmachinery
COMPRESORES TORNILLO - COMPACTOS
COMPRESORES DE TORNILLO - COMPACTOSCompresor Secador Tanque de Aire de 500 litrosMODELOMotorAir Delivery / Discharge PressureHPKW0.7Mpa0.8Mpa1.0Mpa1.2Mpa32IG-HD-5C540.65 m3/min0.55 m3/min0.4 m3/min0.35 m3/min32IG-HD-7.5C7.55.50.85 m3/min0.75 m3/min0.56 m3/min0.48 m3/min32IG-HD-10C107.51.3 m3/min1.2 m3/min1.0 m3/min0.8 m3/min32IG-HD-15C15111.8 m3/min1.6 m3/min1.3 m3/min1.2 m3/min32IG-HD-20C20152.6 m3/min2.4 m3/min2.2 m3/min1.7 m3/min32IG-HD-30C30223.8 M3/min3.6 m3/min3.0 m3/min2.6 m3/minVolta...
AMXmachinery
SIERRA VERTICAL - MILWAUKEE
PARTE: 12268 - SIERRA VERTICAL - MILWAUKEE
USADA - MUY BUENAS CONDICIONESSE USO APROXIMADAMENTE SOLO 20 VECES1 SIERRA CIRCULAR INSTALADA
MOTOR 3-1/4 HP, 120V, 6,300 RPM, 15AEspecificaciones técnicas• Amperes
@ 120V15.0• RPM
sin Carga5800• Altura
Total70"• Protector
de Cuchilla Removible• Diám.
de la Hoja8 1/4"• Voltaje120
VCA• Pre...