Identificador: 1365
Abierta
ID de articulo : # 1365 se ha agregado a su lista de deseos.
Descripción
PARTE: 1HA-0001 - JUEGO DE 4 CUCHILLAS - PARA BASTONERA HAWKER
PARA BASTONERA MODELO HAWKER 500, HAWKER 1500, HAWKER 2000, ETC.
MEDIDAS: 6 MM ESPESOR X 55 MM ANCHO X 100 MM LARGO
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
AFILADOR SIERRA CINTA 30-40 MM
PARTE # 2LSL-99990000506 - AFILADOR AUTOMATICO - ANCHOS 30-40 MMNUEVA CON GARANTIAAFILA SIERRAS DESDE 30 A 40 MM ANCHO EN 1 SOLA PASADAPARA DIENTES ENTRE 18 A 23 MMThe bandsaw blade grinder shall only be used for bandsaw blades with hardened saw teeth. The pitch shall be 25 mm and the bandsaw blade width shall be 32 mm.Motor Data, Grindlux 4000Voltage, V: 12Speed, rpm: 2800Peripheral speed, m/s: 22Power, W: 90Amperage, A: 7.5Grinding disc, mm: 150 x 6 x 16Fuse, A: 12 / 0.25Weight: 18.1 lbs. (8.2...
AMXmachinery
BOMBA HIDRAULICA - 3 HP - 2,500 LBS - TANQUE 60 LTS - VIKERS
PARTE:
1ZU-001 - BOMBA HIDRAULICA - 3 HP - 2,500 LBS - TANQUE 60 LTS - VIKERS
USADA - BUENAS CONDICIONESMOTOR 3 HP, 220/440V, 3 FASES, BALDOR2,500 LBS PRESION3 GALONES/MIN
TANQUE 60 LTS
AMXmachinery
ROUTER CNC - 5 x 10 PIES - SCMI
PARTE: 12692 - ROUTER
CNC - 5 x 10 PIES - SCMI
Usado
- Buenas condiciones
SCMI Pratix S 15 CNC 5 x 10
(14) position tool changer
Twin Becker Vacuum pumps.
Professionally disassembled and labeled. Very
low hours.
5 x
10 Scissor Lift Included
-500x500.jpg)
AMXmachinery
HORNO PARA CERAMICA, VIDRIO, METALES - INDUSTRIAL - 433 LITROS
PARTE:
2PG-SUPERDRAGON – HORNO PARA CERAMICA, VIDRIO, METALES - INDUSTRIAL - 433
LITROSNuevo con garantía
Max. Temperatura: 1287 grados centígrados
21,600 Watts, 90 Amps.
Medidas interiores: ancho 666 mm x largo 686 mm x 914 mmQuick to loadIf you fire ware that is similar in size from one firing to the
next, you can leave the shelves and posts stacked in the Dragon between
firings. Reach into the kiln to remove the ware and reload the kiln for the
next firing.Since you are load...