Identificador: 148
Abierta
ID de articulo : # 148 se ha agregado a su lista de deseos.
.jpg)
Descripción
PARTE # 2TA-WS-DA3760 - LIJADORA - CALIBRADORA - 37" ANCHO
Cabezales: 2 cabezas
Capacidad: 37" ancho x 60" largo
- With the two head wide belt sander, you can accurate heavy sanding your stock with the first drum head and with the second combinational head you can give the unlimited fine finish.
- Rugged heavy-duty sheet metal construction designed for durability usage.
- Full power industrial motors drive sanding and auto infeed smoothly.
- Infeed and outfeed are spring loaded hold down rollers to ensure positive feeding without sanding mark.
- Combination platen & drum sanding head for best sanding choice such as
- 1. With the platen up, the sander functions as a drum only machine, for sanding with a 40 ~ 100 grit belt.
- 2. With the platen and drum same level, intermediate and final finishing is possible, using a grit of 120 ~ 180.
- 3. With the platen down (below drum), used for the fine finishing or lacquer sealer sanding, with 180 ~ 600 grit.
- Sanding platen with a quick release and lock down designed for easy removal or loading of graphite platen.
- Computerized thickness adjustments control with accurate digital read out, just key in the size you are desired and automatic table movement for sanding thickness within 0.005? accuracy.
- Large size diameter contact drum is dynamically balanced rubber covered spiral grooves, design to provide considerable advantages for the effective removal of material.
- Special rubber feed belt for safe non-slipping, transporting the work pieces.
- The abrasive belts are tracked by oscillating cylinders linked to the upper roller. The edge of the belt is detected by electric eye sensor, which in turn control the air supply to the position via solenoid value. Also one limit switch it?s located on each and end top roller of the sander paper for quick stop in case of the event of belt breakage.
- Main table designed with the convenient leveling adjustment which assures greater stability with excellent tolerance they provide variable from 0? ~ 5? range sanding thickness.
- 4 Heavy-duty jackscrews powered conveyor table elevation.
Opcionales:
- Cilindro Acerado
- Patin Neumatico
OTROS MODELOS Y CARACTERISTICAS:
| SPECIFICATION | ||||
| Max. Working Width | ||||
| Max. Working Thickness | ||||
| Min. Working Length | ||||
| Sanding Belt Dimensions (W x L) | ||||
| Dust Collection Hood (Dia x Holes) | 8" x 2 | |||
| Main Motor | ||||
| Feed Motor | ||||
| Table Raising / Lowering Motor | ||||
| Var. Feed Speed (FPM) | ||||
| Working Air Pressure | ||||
| Exhaust Volume Require | ||||
| N.W. | ||||
| G.W. |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: AMX-10127 - EXTRACTOR DE PARED - ASPAS 15” DIAMETRO - MOTOR 1/3 HP
PARTE: AMX-10127 - EXTRACTOR DE PARED - ASPAS 15”
DIAMETRO - MOTOR 1/3 HP
MOTOR 1/3 HP, 220/440V, 3 FASES
MEDIDAS: 15” DIAMETRO INTERIOR X
19” DIAMETRO EXTERIOR X 11” FONDO
HECHO EN ITALIA
AMXmachinery
PARTE: 2CA-TRS-0016 - SIERRA RAJADOR - 1 HOJA – UNION PEGADO – MOTOR 15 HP – SIERRA 16”
PARTE: 2CA-TRS-0016 - SIERRA RAJADOR - 1 HOJA – UNION PEGADO – MOTOR 15 HP – SIERRA 16”Nueva con garantíaTheir precision machining and attention to operator safety and the production needs make these machines some of the most cost effective machines available in the world today.Hard chrome-plated table for maximum wear resistance.Precision fence ensures absolute accuracy between blade & fence, equipped with measuring ruler gauge.Double anti-kickback fingers mounted at the infeed end pro...
AMXmachinery
PLANTA DE LUZ 4,500 WATTS
PARTE: 1PW-4500 - PLANTA DE LUZ 4,500 WATTSMODELOPW-4500FASESMONOFASICAARRANQUEMANUALCAPACIDAD MAXIMA4500 WATTSCAPACIDAD NORMAL3600 WATTSVOLTAJE120 VOLTSAMPERAJE20 AMPMOTOR7 HP/3600 RPMNIVEL DE RUIDO60 DB @ 7 MTSTANQUE15 LTSFUNCIONAMIENTO AL 50% DE CARGA13 HRSPESO48 KGSCONTIENE KIT DE ARRASTRE
AMXmachinery
PARTE: 12589 – LINEA DE PINTURA – MOLDURAS – RENZO BORGONOVO
PARTE: 12589 – LINEA DE PINTURA – MOLDURAS – RENZO BORGONOVOUSADA - MUY BIENAS CONDICIONES - REVISADAModelo: SP 6PPara partes lineales como molduras, pisos, tiras de madera, etc.Can be used with water-based paints, thinners, nitro and polyurethane paints, paints containing pigments, acrylic paints, matt and gloss paints. The machine features 4 spray stations comprising each of up to 2 automatic spray-guns, a tray collection and a duct for direct product recovery. The machine is operated ...