Identificador: 1503
Abierta
ID de articulo : # 1503 se ha agregado a su lista de deseos.
Descripción
PARTE: 12294 - LIJADORA DE BANDA ANCHA - 52” ANCHO - 3 LIJAS - TIMESAVERS
USADA BUENAS CONDICIONES
460/60/3 electrics
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12609 - SIERRA RAJADORA – 1 SIERRA – IMC RP-12U
PARTE: 12609 - SIERRA RAJADORA – 1 SIERRA – IMC RP-12UUsada – Buenas condiciones15 HP, 220/440/60/3 motor, (belt driven)24" throat clearance56-1/2" x 74" workspace2 HP feed motor, (75-150 FPM) variable feedComplete with automatic chain lubication, magnetic controls and (1) set of anti kickbacks fingers62" x 80" x 60" overall dimensions
AMXmachinery
PARTE: 2EB-KSF-24303 - ARMADORA DE MARCOS – KSF - 24303
PARTE: 2EB-KSF-24303 - ARMADORA DE MARCOS – KSF - 24303Nueva con garantiaFrame/moulding width range: 6-150 mm (0.24"-5.9")Frame/moulding thickness range: 6-100 mm (0.24"-3.94")V-nail sizes: 7,10,12,15mmWeight:56kgPackage Dimension : 43.3" (L) x 21.6" (W) x 23.2" (H)Packing: wooden packingFeaturesAny hardness of wood can easily nail cornersNo power required, no air pressure required, This machine removes most of the electronic components, which also greatly reduces the damage rate of this machi...
AMXmachinery
POSTFORMADORA - 12 PIES LARGO 1 LADO - EVANS 0110
PARTE: 2EV-0110 - POSTFORMADORA - 12 PIES LARGO 1 LADO - EVANS 0110Maximum Post Forming Length : 12’Overhead Radiant Heater and DeflectorsPush Button Pneumatic ControlsSteel frame with adjustable leveling feet.35" working height. Dimensions 175” long, 26” wide, 60” highAdjustable Leaf Spacing Between ½” and 1 ½”Electrical: 240 V, 1 PH, 60 HzAir Requirement: 100 PSICrated weight 1500 LBS. Shipping dimensions 182” long X 30” wide X 64” highOptions: ¼” cove rod system (requi...
AMXmachinery
SIERRA CINTA – VILANTES 36” – CON ALIMENTADOR – TRI STATE
PARTE: 12225 – SIERRA CINTA – VILANTES 36” – CON ALIMENTADOR
– TRI STATE
USADA – MUY BUENAS CONDICIONES
8,500 PPM
blade 2”
max.17’4”,
8”max. material
width, variable speed feed works 6’x6’ rolls
Motor principal: 20 HP, 230/460 V, 3 PH
Alimentador: ½ HP