Identificador: 1648
Abierta
ID de articulo : # 1648 se ha agregado a su lista de deseos.
Descripción
PARTE: 12347 - SIERRA TRONZADORA – 7.5 HP - DISCO 14" - IZQUIERDA
USADA - BUENAS CONDICIONES
Motor 7.5 HP, 220V, 3 phase
4100 RPM arbor speed
Left Hand Model uses a 14” diameter saw blade with 1” bore
Cuts boards up to 1” x 10” or 2”x 9”, 3” x 8” at a rate of up to 95 strokes per minute
Standard full coverage safety guard
Table size is 25” x 23-1/4” with a table height of 32-3/4”
Requires 600 CFM air supply, and has a 4” diameter dust port
Machine weighs 530 lbs
Overall dimensions are 31”L x 30”W x 51”H
MFG 2014
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
LIJADORA DE BASTONES - 2 LIJAS
PARTE: 2SW-FS-80B2 - LIJADORA DE BASTONES
- 2 LIJAS
NUEVA CON GARANTIASpecificationsSanding
Belt Drive Motor: 5HPDust
Sution Motor: 1/2HPSanding
Belt Size: 5" X 73”Applicable
Rod Diameter: Ø5-Ø80mmFeed
Speed (Variable): 1-20m/mmSanding
Belt Linear Speed: 1080m/mmNet
Weight: 450kgsGross
Weight: 530kgsMachine
Dimensions (L*W*H): 1050*850*1300mmPacking
Dimensions (L*W*H): 1120*920*1520mm
Design
and specifications are subject to change wi...
AMXmachinery
PEGADORA DE SABANAS - FISHER RÜCKLE
PARTE
# 12161 – PEGADORA DE SABANAS - FISHER RÜCKLE
USADA – MUY BUENAS CONDICIONES
Year of manufacture 1993
Opening width mm 2.850
Veneer thickness min mm 0,4
Veneer thickness max mm 2
Strip width min mm 70
Strip width max mm 430
Width of lifting table mm 430
Feedrate max m/min 24
Gluing aggregate Yes
Cross splicing machine Yes
Lift table Yes
Trimming unit Yes
Joint Only edge gluing
Operating status dismantled/ stored
AMXmachinery
DOUBLE MITER SAW - 45 DEGREES - 12” DIAMETER CAPACITY - CTD D45
PART:
AMX-10079 - DOUBLE MITER SAW - 45 DEGREES - 12” DIAMETER CAPACITY - CTD D45
Used
- Good condition
Two (2) saws fixed at 45° angle (saw heads are adjustable up
to 3°)
(2) motors, 1.5 HP, 208-230/460V, 3 phase, currentle
connected to 220V
3,900 blade RPM
Back fence
2 New On/Off
Switches with magnetic starters
2 Saw blades installed 10” diameter,
Cutting
capacity with 10" blades:
2-1/2" width x 3-1/4" height
Machine capacity up to 12” diameter...
AMXmachinery
SIERRA DE PANELES
PARTE # 2DO-CONCEPT-2600 - SIERRA DE PANELES AUTOMATICAAn Innovative and Surprisingly Affordable Beam / Panel Saw ... 100% Made in ItalyAs compared to a Sliding Table Saw or Vertical Panel Saw, Concept 350 is more accurate, is easier to operate, is much safer, and can be up to 3x more productive !Allows the small to mid-sized shop to advance with capacity and accuracy previously only available to larger operations with much larger machinery budgets. Occupies about the same footprint as a sl...