Identificador: 1678
Abierta
ID de articulo : # 1678 se ha agregado a su lista de deseos.
Descripción
PARTE: 2CK-PCS18 – SIERRA TRONZADORA – 10 HP - DISCO 18” – IZQUIERDA
PARTE: 2CK-PCS18R – SIERRA TRONZADORA – 10 HP - DISCO 18” – DERECHA
- Large cutting capacity of 2”x12” up to 4”x10”
- Adjustable cutting stroke to ensure optimum cutting speed and cut quality
- Reliable performance day in and day out
- Added safety features
- Available in Right Hand & Left Hand configuration
- Cut off capacity (thickness x width): 2″ x 12″, 3″ x 11″, 4″ x 10″
- Powerful 10HP main motor
- Pneumatic foot pedal operation with adjustable cutting speed from the front of the machine (Optional dual push button control)
- Fast cutting cycle with up to 45 strokes per minute
- Cast iron table surface is precision ground assuring high cutting accuracy.
- Material clamp is easily adjusted for workpiece thickness variation.
- CSA/UL magnetic switch
Cutting capacity (thickness x width) | 2″ x 12″, 3″ x 11″, 4″ x 10″ |
Cycle speed | 45 strokes/min |
Cycle operation | Air |
Saw blade size (optional) | 18″ |
Saw arbor diameter | 1″ |
Saw blade speed | 3600 RPM |
Dust exhaust diameter | Ø4″ |
Air | 9.8 CFM / 70-85 PSI |
Motor | 10 HP |
Table size | 26” x 27 ½” |
Net weight | 770 lbs. |
Gross weight | 902 lbs. |
Machine dimensions (LxWxH) | 42” x 27” x 48” |
Packing dimensions (L x W x H) | 37” x 33 ½” x 53.2” |
- Safety guard covers infeed and outfeed to maximize operators safety during cutting operations
- Infeed guard has adjustable fingers to minimize opening
- Door safety limit switches with extended security bolt
- Emergency stop button
- Optional dual push button control which requires both buttons to be pushed simultaneously to cycle the saw
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
BRIQUETEADORA – MOTOR 7.5 HP – DIAMETRO 50 MM (1.96”)
PARTE: 2CA-BP-100 – BRIQUETEADORA –
MOTOR 7.5 HP – DIAMETRO 50 MM (1.96”)Use sawdust, wood, paper, grass, leaves, all kinds of chips to make the briquettes.• Cost saving management of waste material reduces the volume of waste to be handled or shipped.• Effectively helps with compliance of local regulations mandating reduction of solid waste.• Converts waste into a valuable heating source for colder climates.• Increases profitability by converting waste into a marketable produc...
AMXmachinery
DEBARKER NICHOLSON 27"
PARTE # 11604 – DEBARKER - NICHOLSON 27" A5A RINGEN BUENAS CONDICIONES DE OPERACIONLEFT HANDAIR SEAL
AMXmachinery
CALDERA - HURST 400 HP
PARTE: 12317 - CALDERA - HURST 400 HP
USADA - BUENAS CONDICIONES
HURST 400 HP
MFG: 1997
AMXmachinery
OVER ARM ROUTER
PARTE # EV-2470 - OVER ARM ROUTER - EVANS 2470- 110 Volt- Standard Features:- 3 HP router motor- 80 PSI Required- 21,000 RPM- Working height 33"- Includes router bit Part # 08018- 30" x 48" cutting area- Lateral adjustment of pneumatic clamps.- Crated weight 1010 LBS. Shipping dimensions 69" depth X 72" wide X 85" high