Identificador: 170
Abierta
ID de articulo : # 170 se ha agregado a su lista de deseos.
Descripción
PARTE: 2TA-SET-100 - 3YC-YRT-115 - ESPIGADORA - 2 MESAS - AMX MACHINERY
Nueva con garantia
- Built with two working tables for high efficiency operations.
- Table longitudinal traverse is pneumatic operated for smooth cutting.
- Tenon’s width is easily adjustable by hand wheel.
- Convenient tenon depth adjustment from outside without removing covers.
- Table can be tilted to 20 degrees at each side for angular tenon.
- Cutter moving speed is infinitely adjustable to achive the best results.
- Pneumatic hold down clamps and pneumatic cutting movement for smooth finish.
- Fully automatic tenon produce cycles.
- Automatic lubrication system.
- Powerful industrial motor for maximum cutting capacity.
- Precision sealed long-life bearing.
- Heavy cast iron frames and table for durability usage.
SPECIFICATIONS | SET-100 | CM-100 |
Max. Width of Tenon (Mortise) | 4" | 4" |
Max. Depth of Tenon (Mortise) | 2" | 2-3/8" |
Oscillation Rate | 13 ~ 80 PCS/MIN. | 7 ~ 200 STROKE/MIN. |
Table Tilts | 20° | 20° |
Spindle Drive Motor | 3 HP | 3 HP |
Cutter Feed Motor | 1 HP | ½ HP |
Cutter Speed | 9500 RPM | 9500 RPM |
Table Vertical Adjustment | 3" | 3" |
Max. Thickness | 4" | 4" |
Max. Stoke Width | 5" | 4" |
Air Pressure | 80 PSI | 80 PSI |
Machine Size | 63" x 51" x 51" | 51" x 47" x 47" |
N.W. | 2200 LBS | 1540 LBS |
G.W. | 2640 LBS | 1880 LBS |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12598 - UNIDORA SABANAS CHAPA - FISHER+RUCKLE FZL-34 DELTA
PARTE: 12598 - UNIDORA SABANAS CHAPA - FISHER+RUCKLE FZL-34 DELTAUSADA – BUENAS CONDICONESFISHER+RUCKLE FZL-34 DeltaVeneer crossfeed splicing machine with pre-glued veneer sheetsVeneer strip length (in fiber direction) 750 - 3400 mm Veneer strip width (cross to fiber direction) 70 - 600 mmVeneer strip thickness (depending on veneer) 0.3 - 1.5 mmEC standardsYear 1998400V/50HzComplete of:- INTERMEDIATE CONVEYORThe intermediate conveyor serves at the same time as buffer to avoid dead times durin...
AMXmachinery
ROUTER DE PEDESTAL
PARTE: 12-R1200 - ROUTER DE PEDESTAL - MOTOR 5 HPMotor de 5 hp, 220V, 3 fasesVelocidad de husillo variable: De 0 a 18,000 RPMEstructura placa 3/16Mesa de fundicion 600 x 800 mmDesplazamiento de cabezal rieles de 22 mm tipo CNCBaleros de alta velocidadBanda plana de 30 mmUnidad FRLPiston neumático de 3" pulgadas de diametroAccionamiento neumaticoSpindle enfriado por aireDesplazamiento vertical de la mesaPeso 400 Kg
AMXmachinery
PARTE: 12131 – LIJADORA BANDA ANCHA – SUPERIOR E INFERIOR – 52” ANCHO - TIMESAVERS
PARTE:
12131 – LIJADORA BANDA ANCHA – SUPERIOR E INFERIOR – 52” ANCHO - TIMESAVERS
USADA – EN BUENAS CONDICIONES
3 lijas superiores y 3 lijas inferiores
Constant passline (38”
height).
This unit is ideal for sanding
heavy panels
Bottom Head first:
1st Head 60 HP 80/70 durometer
Contact Drum,
2nd head 50 HP 80/70 durometer
contact drum,
3rd head 40 HP Platen
96” long Conveyor between
machines driven by the top head machine
Top Head
1st Hea...
-500x500.jpg)
AMXmachinery
PARTE: 1AM-1180-G – RESACADORA PARA TARIMAS – 40 CUCHILLAS INSERTOS – RESAQUE 9” LARGO - USO RUDO – INDUSTRIAL – MOTOR GASOLINA
PARTE: 1AM-1180-G – RESACADORA PARA TARIMAS – 40
CUCHILLAS INSERTOS – RESAQUE 9” LARGO - USO RUDO – INDUSTRIAL – MOTOR GASOLINANueva con garantía – 6 meses
sobre defectos de fabricación en partes mecánicasMotor Gasolina 13 HP
Resaque máximo 9” largo x 3” alto x 3” profundidad400 a 800 cortes/hr aprox.Cabezal con 40 cuchillas intercambiablesCabezal y Cuchillas de Importación – La más Alta Calidad
Construcción Uso Rudo IndustrialVideo -
htt...