Identificador: 1742
Abierta
ID de articulo : # 1742 se ha agregado a su lista de deseos.
Descripción
PARTE: 2CK-GT610HI
Is capable of speeds up to 98 feet per minute and its robust cast-iron body & industrial cardan drive system ensure high production planing day in and day out. The large diameter cutterheads are spiral type with two-sided solid carbide inserts which produce a clean finish with superior stock removal capacity. The spring loaded feed system passes the material over the bottom head allowing it to act like a jointer to flatten the board prior and then a sectional infeed roller feeds the material through the top head for accurate dimensioning.
- Powerful 40HP top head motor and 30HP bottom head motor for maximum stock removal
- Full cardan shaft feed system allowing for faster feed speeds up to 98 FPM
- Planing capacity up to 24” wide and 8” thick
- Pin type carpet feed system passes the material over the bottom head to ensure a flat surface
- (7) bed rollers including (3) driven rolls for superior feed speeds
- Spiral insert knife cutterheads with 6 rows of two-sided 30x12x2.5mm solid carbide insert knives provide superior stock removal, reduced machine load and noise, and optimum finish quality
KEY ADVANTAGES
- Cast iron machine frame for superior vibration damping resulting in a long machine & bearing life
- Chrome-plated tables and top and bottom for maximum wear resistance
- Cutterheads are mounted in precision ABEC 7 RHP bearings
- Feed system uses a spring-loaded pin arrangement to pass material over the bottom jointing head.
- Sectional serrated infeed roll before the top cutterhead
- Variable feed speed by frequency inverter (VFD) with digital display for the feed speed
- Digital thickness control for quickly and precisely setting the desired thickness
- Upper assembly is adjusted for desired thickness by four large diameter cylindrical postsAdjustable infeed bed by easily
- accessible handwheel to set desired stock removal on the bottom head
- Easy to access swivel control panel with individual ammeters for load monitoring and hour meter to aid in maintenance planning
- Cutterhead starters are Y-Delta providing soft start to the heads for reduced power consumption on startup
- Automatic lubrication to the conveyor feed system
- High quality Schneider electrical components to CSA/UL standard
|
|
INCH
|
METRIC
|
|
Max. working width |
24” |
610mm |
|
Max. working thickness |
8” |
200mm |
|
Min. working thickness |
5/16″ |
8mm |
|
Min. working length |
12” |
300mm |
|
Cutterhead RPM |
5000 RPM |
|
|
Cutterhead diameter |
5.3” |
135mm |
|
Feed speed |
30-98 FPM |
10 – 30 m/min |
|
Top cutterhead motor |
40 HP |
|
|
Bottom cutterhead motor |
30 HP |
|
|
Feed motor |
5 HP |
|
|
Table Rolls |
7 (3) driven |
|
|
Opening hoist motor |
1 HP |
|
|
Machine weight |
8800 lbs |
4000 kgs |
|
Machine dimensions (LxWxH) |
112” x 67” x 67” |
2830x1700x1700mm |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.png)
AMXmachinery1
BARRENADORA HORIZONTAL - 4 HUSILLOS
PARTE: 2RI-R8043 - BARRENADORA HORIZONTAL - 4 HUSILLOSDescription:Was designed for heavy-duty production boring applications. Spindles are designed with multiple bearings to avoid spindle drift and fatigue. Spindle centers are easily adjusted to accommodate multiple spindle boring patterns. The fixed table work height easily accommodates electronic and manual material stop systems and tables. The spindle height above the table is adjusted from the front of the machine for easy operator access....
-500x500.png)
AMXmachinery1
ESPIGADORA Y MORTAJADORA - 6 EJES
PARTE: 2PI-MMTX - ESPIGADORA Y MORTAJADORA - 6 EJESIs a dual carriage, 6 axis CNC controlled Miter Mortise and Tenon Machining Center – tailored specifically to meet high-volumeproduction requirements.Elimination of complicated machine setups climb cut of both tenon and mortise cuts for a “tear out” free cut.Climb cut of both tenon and mortise cuts for a tear out free cut.The ability to cut MDF paper or vinyl wrapped profiles.Eliminates the need for applying inlays.Reduces the maintenance...
AMXmachinery1
CIERRA DOBLE
CIERRA DOBLEDouble precision saw• Capacity of up to 14 pcs/min• One-man operated• Vertical magazineExtra• Chamfering unit• Waste ConveyerLength:170 – 1500 mm170 – 2200 mmHeight:10 – 40 mmWidth:25 – 190 mm
-500x500.png)
AMXmachinery1
DOBLADORA DE METAL 10' X 10 GA
DOBLADORA DE METAL 10' X 10 GA PARTE: 2GM-1010EThis machine has a 7 1/2 HP Motor, rated at 220V three phase.Power bending roll up/down with push button & display. 6.70" RollsSO 9001 certifiedTaiwan machinesAll (3) rolls are hardened rolls, up to 50-52 HRC3-rollers are driven to perform high accuracyAdjustable cone attachment included3/8”, ½” and 5/8” grooves on rollersOne wheel one-side operated for bending rollOne wheel one-site operated for ...