Identificador: 1757
Abierta
ID de articulo : # 1757 se ha agregado a su lista de deseos.
Descripción
PARTE: 2CK-C371
Is compact and versatile with a combination sanding unit for calibration and final sanding. The robust sanding unit and heavy-duty frame ensures optimum sanding results. Motorized thickness adjustment with digital thickness control for fast and accurate table adjustment.
- Accurate digital thickness control with both Inch & Metric settings allows operator to key in the desired thickness and table will automatically move into position.
- Small footprint
- Combination sanding unit with 5” rubber contact drum and 2” wide adjustable sanding platen for a wide range of sanding applications.
KEY ADVANTAGES
- Electronic belt tracking for optimum belt life and sanding results
- Ammeter for load monitoring to ensure the proper amount of material is being removed according to the selected grit.
- Disc brake on main motor allows for faster belt changes
- Pneumatic belt tensioning with quick release outboard support to facilitate fast belt changes.
- Double infeed and outfeed pressure rolls for superior part hold down
- Four table raising jack screws
- Material over-height limit switch
- Hour meter records the actual running time of the machine which can be used to provide timely maintenance for the machine
- Interlocks located on all access doors.
|
|
|
Metric |
|
Abrasive belt size |
37” x 60” |
939 x 1524 mm |
|
Main motor |
20 HP |
|
|
Feed motor |
2HP |
|
|
Table rise/fall motor |
½ HP |
|
|
Maximum width stock |
36” |
910 mm |
|
Minimum part length |
13” |
330 mm |
|
Minimum thickness opening |
5” |
127 mm |
|
Feed speed: variable |
13 to 52 FPM |
4 to 16 m/min |
|
Passline height |
33”- 38” |
838 – 965 mm |
|
Infeed table |
11 ½” |
292 mm |
|
Dust outlet |
1 @ 5” |
1 @ 127 mm |
|
Compressed air usage |
2 CFM @ 90 PSI |
2 CFM @ 90 PSI |
|
New weight |
1980 lbs |
900 kgs |
|
Machine dimensions |
64” x 53” x 73” |
1625 x 1346 x 1854 mm |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.png)
AMXmachinery1
ESPIGADORA HAUNCHING
PARTE: 2PI-HMJ - ESPIGADORA HAUNCHINGIs a jump haunch machine for beaded face frames.Simple and user friendly interface.Small footprint.Increased production by its ability to double up parts on one cut.Ease the assembly process by providing self aligning joints.
AMXmachinery1
LIJADORA EN SERIE
PARTE: 2LA-6000 - LIJADORA EN SERIEWill brush sand and/or wire brush parts with standard widths from 25 to 73 inches. It has 1 to 6 spindles which will accommodate sanding or wire brushes up to 14 inch diameter. It has a fixed height conveyor and accommodates parts up to 9 inches thick.fully customizable to suit shop needsdesigned with a small footprintideal for sanding long thick partsruggeddependable
-500x500.png)
AMXmachinery1
BARRENADORA HORIZONTAL - 3 HUSILLOS
PARTE: 2RI-R131 - BARRENADORA HORIZONTAL - 3 HUSILLOSDescription:Designed for a dedicated and accurate boring center with single, double or triple spindle boring capability. Stile and rail boring set-up features help eliminate costly mistakes, rejected parts and increase production efficiency. The workpiece is held firmly against the table by a pneumatic clamp, and there is full adjustability of the index stops, bed height, and depth of cut.Standard Features:Triple Spindle Gear Driven Drill H...
-500x500.jpg)
AMXmachinery1
ASTILLADORA - 26 PULGADAS
PARTE: 2TA-WG-2630 - ASTILLADORA - 26 PULGADASFeatures:A specially designed, powerful crusher for different materials such as wood, plastic, rubber, corn cobs, etc.Excellent wearing ability and impact-resistant for time & labor saving.Large busting capacity and easy feeding system.The shaft rest for the cutter head is constructed by round hollow with special angle to keep cooling for long hours' usage.Cutter head angle cutting design allows aggressive cutting rates & high speed shredding of ...