Identificador: 1815
Abierta
ID de articulo : # 1815 se ha agregado a su lista de deseos.
Descripción
PARTE: 2CK-AF19N
Is designed to allow consistent and automated feeding of material through vertical bandsaw or resaws. Is pneumatically actuated by a switch in the fence so no foot pedal is required making for a simple and convenient operation. With 10 feed speeds to choose from you can dial in the optimum feed speed for your material. Intended to be fit on bandsaws which are over 24” but could be fitted on smaller bandsaw tables, but may require an extension off the side of your bandsaw table where the feeder is mounted.
- Consistent feeding for bandsaws and resaws
- Pneumatic activation of feeding unit, no foot pedal required
- 10 feed speeds for optimum control
- Line bar roller fence is easily adjusted by rack and pinion handle
- Comes with (2) adjustable steel serrated rollers
- Can be mounted to almost any bandsaw/resaw (recommended for 24” and up)
KEY ADVANTAGES
- Heavy duty construction
- Adjustable feed wheels to accommodate for the height of your material
- Roller fence aids in feeding of material
|
|
INCH |
METRIC |
|
Feed Speeds (10) |
4/8.5/8.5/14/17/25/28/30/50/60 FPM |
1.5/2.5/2.5/4/5/7.5/8/9/15/18 M/min |
|
Roller size |
Φ6-7/8”x 1-9/16″ x 2 pcs / Cast Steel |
Φ175 x 40 mm x 2 pcs |
|
Motor |
1/2 HP (0.375 KW), 3 phase; Forward |
1/2 HP |
|
Maximum roller stroke |
8” |
200mm |
|
Fence dimensions |
16” x 7 7/8” |
400 x 200mm |
|
Max. Roller-Blade Clearance |
8 1/4” |
210mm |
|
Net Weight |
79 Kg |
176 Lbs |
|
Gross Weight |
97 Kg |
209 Lbs |
|
Packing Size |
1220 x 480 x 470mm |
48″ x 18-7/8″ x 18-1/2″ |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
PRENSA HIDRAULICA MANUAL
PARTE: 4ST-STH/D - PRENSA HIDRAULICA MANUALMANUAL HYDRAULIC PRESSCLASSICS FOR GLUINGIs a hydraulic press for gluing blockboard with 2 work stations.Its sturdy frame on wheels, two of which are steerable, combined with its compact size make it the ideal solutionfor the production of blockboard panels in small and medium-sized businesses.The work unit consists of manual hydraulic cylinders that are adjustable in height, practical and functional.Vertical sliding uprights with front wood pressers. ...
AMXmachinery1
COLECTOR DE POLVOS MODULAR - 10 HP
PARTE: 2EX- DC-3100 - COLECTOR DE POLVOS MODULAR - 10 HPIs powered by a 10 horsepower motor and comes equipped with 3 1-micron filter bags. It features a 99 square foot filter area with 36 cubic feet of storage capacity measuring 112 inches tall by 110 inches wide by 32 inches deep. This three-phase dust collector has 27 amps at 220 volts. Modular ring design enables increased storage and filter capacity. Magnetic starter included. Please refer to the comparison chart below for specification...
-500x500.png)
AMXmachinery1
SIERRA DE BANCO
PARTE: 12749 - SIERRA DE BANCOIncludes fence and extension table support legsIncludes miter gauge assemblyTable is missing a trim piece on the end, see photos of broken wood
AMXmachinery1
SIERRA MULTIPLE - 2 SIERRAS MOVIBLES
PARTE: 2CK-MRS340MThe motorized moving blade system is designed to provide you with maximum flexibility in your ripping operations to achieve the maximum yield from your material. The touch screen control allows the operator to pre-set the blades position(s) or jog the blades to achieve the desired ripping result. Each moving blade is controlled by a servo motor and is adjusted using a ball screw and linear guideway for the highest accuracy. The blade position is indicated with a laser...