Identificador: 1845
Abierta
ID de articulo : # 1845 se ha agregado a su lista de deseos.
.jpg)
Descripción
PARTE:
2HA-97181 – LIJADORA DE DISCO Y BANDA
NUEVA EN SU CAJA ORIGINAL
Powerful
3.5 amp motor
Cast aluminum table tilts to 60° for use with belt or disc
6 in. disc for fast stock removal
Miter gauge for sanding angles on workpiece
Adjustable belt sands inside and outside curves
Reinforced steel motor housing
AC Volts: 120
Accessories Included: Miter gauge, sanding belt and sanding disc
Amperage (amps): 3.5
Belt width”: 4 in.
Diameter disk: 6 in.
Horsepower (hp): 3/4
Speed (max): 1819 RPM (disc) / 1185 SFPM (belt)
Product Weight: 27 lb.
Shipping Weight: 28.80 lb.
Table tilt (deg): 60°
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
RESISTENCIA ENSAMBLADO ABAJO
PARTE: 2EV-0110.25K – ENSAMBLADO RESISTENCIAS - ¼” COVER ROD REPLACEMENT KITTamaño paquete 166” x 6” x 6”
AMXmachinery
EXTRACTOR DE TURBINA - 1 HP
PARTE: AMX-10132 - EXTRACTOR DE TURBINA - 1 HP
USADO - BUENAS CONDICIONES
MEDIDAS: 20” ANCHO X 14” FONDO X 22”
ALTO
ENTRADA REDONDA 6”
SALIDA REDONDA 6”
MOTOR 1 HP, 220/440V, 3 FASES
6,500.00 MXN
AMXmachinery
SIERRA ESCUADRADORA VERTICAL – HOLZHER 1265 SUPER CUT
PARTE: 12505 - SIERRA ESCUADRADORA VERTICAL – HOLZHER 1265 SUPER CUT
USADA - MUY BUENAS
CONDICIONESModel: 1265SYear of Manufacture: 2008Condition: Very
GoodElectric: 230
Voltage 60 Cycle 3 PhaseHolz Her Vertical Panel Saw Specifications:Main motor 4 HPDepth of cut 2” maxScoring unit with insert knivesSaw head rotates 90 degrees for rip or cross
cutting Manual shifting back gridgauging bar with flip stop for midway fence
with scaleBottom roller with manual ...
AMXmachinery
SIERRA CINTA – VILANTES 36” – CON ALIMENTADOR – TRI STATE
PARTE: 12225 – SIERRA CINTA – VILANTES 36” – CON ALIMENTADOR
– TRI STATE
USADA – MUY BUENAS CONDICIONES
8,500 PPM
blade 2”
max.17’4”,
8”max. material
width, variable speed feed works 6’x6’ rolls
Motor principal: 20 HP, 230/460 V, 3 PH
Alimentador: ½ HP