Identificador: 1909
Abierta
ID de articulo : # 1909 se ha agregado a su lista de deseos.
.jpg)
Descripción
PARTE: 11763 - CEPILLO NEWMAN 500 - 4 CARAS
11 - CEPILLO NEWMAN 500 - 4 CARAS
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
CALDERA - HURST HYBRID 200, 300, 600 HP
PARTE: 12319 -
CALDERA - HURST HIBRIDAS 200, 300, 600 HP
USADAS - BUENAS
CONDICIONES
Hurst Hibrida 600
HP 150 PSIHurst Hibrida 200
HP 150 PSI
Hurst Hibrida 300
HP 150 PSI
Each system should
include (email for specifics):
Hurst Hybrid
Vessel
Hurst Boild
Furnace with cast grates
Hurst underfeed
stoker system
Hurt Metering
conveyor system
Overfire air
combustion fan
Underfire air
combustion fan
Hurst combustion
air preheater
Access platform...
AMXmachinery
SIERRA CINTA – VOLANTES 40” – 15 HP - CON ALIMENTADOR – PEHAKA
PARTE: 12226 – SIERRA CINTA – VOLANTES 40” – 15 HP - CON
ALIMENTADOR – PEHAKA
USADA – MUY BUENAS CONDICIONES
saw wheel
diameter 1050 mm
cutting height
max. 450 mm
hydraulic tilt table
45°
infeed roll
driven by motor
infeed speed
2,5/5/7,5/15 m/min.
motor power 11 Kw
(15 HP)
table size 1100
mm x 1050 mm
cutting width
(distance between saw stand and sawblade) 1020 mm
diameter of the
connection for a dust suction pipe
overall size: L
22...
AMXmachinery
CALIPER DE BOLSILLO – STARRETT 1025
PARTE: 2EB-STA-1025-6 – CALIPER DE
BOLSILLO – STARRETT 1025
NUEVO CON GARANTIARange 0
in to 4 3/4 in, Graduations 1/32 in, 1/64 in, Accuracy /-0.003 in, Material
Stainless Steel, Dimension Type Fractional Inch, Graduations - Lower Scale 1/32
in, Graduations - Upper Scale 1/64 in, Jaw Actuation Type Slide, Jaw Depth 1
3/8 in, Maximum Measurement - Decimal Inch 4.75 in, Maximum Measurement -
Fractional Inch 4 3/4 in, Measurements Inside, Outside, Measures Depth No,
Measures Inside D...
AMXmachinery
ESPIGADORA DOBLE DE CADENA - SCMI
PARTE: 12413 – ESPIGADORA DOBLE DE CADENA - SCMI
USADA - BUENAS CONDICIONESSCMI Concept 2000 •
Opening Capacity: ~4'•
Two-Post Machine• First
Station: Left & Right Trim Saws• Trim
Saw Motors: 8 HP Each• Second
Station: Left & Right Jump-CopeUnits,
7000 RPM• Jump
Cope Motors: 11.5 HP Each• Third
Station: Left & Right Cope Units, 7000RPM• Cope
Motors: 11.5 HP Each• Load
Space: 32"• Rubber
Padded Feed Chains 2.75" Wide• Pop-Up
Dogs on 14-3/4" Centers•
Push-...