Identificador: 1920
Abierta
ID de articulo : # 1920 se ha agregado a su lista de deseos.
Descripción
PARTE: AMX-10079 - SIERRA DOBLE 45 GRADOS – 2 SIERRAS DE 10” DIAMETRO - CTD D-45
USADA - MUY BUENAS CONDICIONES
2 pistones pequenos a los lados que se activan antes de que las sierras bajen y suban, para que no se mueva el material a cortar
Capacidad de corte con sierras de 10": 2-1/2" ancho x 3-1/4" alto
También le quedan sierras de 12” para más capacidad de corte
Made in USA
Two (2) saws fixed at 45° angle (saw heads are adjustable up to 3°)
(2) motors, 1.5 HP, 208-230/460V, 3 phase
3,900 blade RPM
Back fence
2 new Magnetic starters, 1 for each motor
Foot pedal operation
2 blades Installed
On pallet for ease of loading and shipping
Video: https://vimeo.com/838460247
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
ESPIGADORA 2 MESAS
PARTE: 2TA-SET-100 -
3YC-YRT-115 - ESPIGADORA - 2 MESAS - AMX MACHINERYNueva con garantiaBuilt with two working tables for high efficiency operations.Table longitudinal traverse is pneumatic operated for smooth cutting.Tenon’s width is easily adjustable by hand wheel.Convenient tenon depth adjustment from outside without removing covers.Table can be tilted to 20 degrees at each side for angular tenon.Cutter moving speed is infinitely adjustable to achive the best results.Pneumatic hold down c...
AMXmachinery
BOMBA DE VACIO - 7.5 HP
PARTE: 2TA-VC-DR07 – BOMBA DE VACIO – 7.5 HP - DRY ROTARY VANE(VC-DR07) Dry Rotary Vane Type Vacuum PumpSingle stage rotary vane vacuum pump are directly connected the outer covers of aluminum alloy pump with the electrical motor, for efficient and heat dissipation.The pump are advanced in stable functioning and low noise for acquiring High vacuum pressure, high water vapor toleranceDry operation for oil-less and direct drive with no belts or gears to ensure low energy consumption usageCompa...
AMXmachinery
ALIMENTADOR BASTONERA – HAWKER
PARTE: 12359 – ALIMENTADOR BASTONERA – HAWKER
USADA – BUENAS CONDICIONES
AMXmachinery
PARTE: 12564 - PRENSA ARMADORA DE GABINETES - 98” ALTO X 55” ANCHO X 24” FONDO
PARTE:
12564 - PRENSA ARMADORA DE GABINETES - 98” ALTO X 55” ANCHO X 24” FONDONueva - Nunca UsadaUHLING - HP3000Vertical designPneumatic operationClamping Capacity 55" L x 96" H x
24" DClamping operation is accomplished through four
dual pod pressure bars which are activated and can be individually selected for
quick accurate clamping up to 120 PSIStroke length 3-1/2"Roller bearing mounted carriage with pneumatic
locks
Carriage
mounted operators panel