Identificador: 1930
Abierta
ID de articulo : # 1930 se ha agregado a su lista de deseos.
Descripción
PARTE: 2CA-RM70 - BASTONERA – CAPACIDAD 3/8” - 2-3/8” DIAMETRO
NUEVA CON GARANTIA
- The unit is designed solely for shaping of round poles in wood working factory.
- The 4-stage speed feeding of square workpiece into cutting position by means of feed rollers may continuously push out shaped round poles in full automatic.
- The cutting head has been proven flawless through experience and study of many years.
- The unite cuts out perfectly round rod or stick, such as flag pole, rattan, acrylic molded board, carbon, bakelite, bamboo and wood.
- A hand wheel is provided to adjust simply the feed rollers.
- Wood fragments and dust are cleared off from the unit thoroughly in coherence with spindles revolution.
- Cutting of each type and size of workpiece will be carried out by specific cutter head and rollers for finished products.
- Automatic feeding, one-piece cast iron base.
- High-efficiency industrial TEFC motor for powerful cutting.
Design and specifications are subject to change without prior notice.
| SPECIFICATIONS | ||
| Motor of Main Cutter | ||
| Feed Motor | ||
| Cutter Speed | ||
| Feed Speed | ||
| Total Knife | ||
| Working Size | ||
| N.W. | ||
| G.W. |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 4VF-CSA - CIZALLA - GULLOTINA - SIERRA CINTAS - ANCHOS 150, 200, 310 MM
PARTE: 4VF-CSA - CIZALLA -
GULLOTINA - SIERRA CINTAS - ANCHOS 150, 200, 310 MM
Nueva con garantía
150 MM
200 MM
310 MM
AMXmachinery
SIERRA MULTIPLE - DE VAIVEN - CORTE DELGADO
PARTE: 2OG-ECO - SIERRA MULTIPLE - DE
VAIVEN - CORTE DELGADO - ECO-POWER
NUEVA CON GARANTIAGlue-Ready Slats with
Minimal Saw Kerf Waste The Power Plus Thin
Cutting machine has a sturdy, solid cast iron base and is equipped with a 15kW
(20 HP) main motor. Cuts solid wood blocks into glue able slats with minimal
saw kerf waste.The machine can run
products up to 250mm in height (10”). Provides a high
performance and quality machine for the production of veneer slats. The machine can be...
AMXmachinery
PARTE: 12514 - PRENSA HIDRAULICA GRANDE
PARTE: 12514 - PRENSA HIDRAULICA GRANDE
USADA - BUENAS CONDICIONES
AMXmachinery
PARTE: 12597 - TRITURADORA - BLOAPCO - MODELO 7-6
PARTE: 12597 - TRITURADORA - BLOAPCO - MODELO 7-6USADO – BUENAS CONDICIONES - RECONSTRUIDOMax trim width 7.5"Shear Cutting ActionRotor Speed 500 to 3,600 rpm1 HP motorModel 7-6 provides cutting via one stationary bed knife and two rotating knives provides two cuts per revolution. The open-rotor design facilitates free passage of air and material. Shear-cut action for paper and tough, thin film and foil. Total weight is 135 pounds17"L x 13.25W x 22.5H