Identificador: 1953
Abierta
ID de articulo : # 1953 se ha agregado a su lista de deseos.
Descripción
PARTE: AMX-10141 - ABANICO - 30” DIAMETRO - MOTOR ½ HP
USADO - BUENAS CONDICIONES
30” DIAMETRO
16” FONDO
MODELO: 41NC07
MOTOR: ½ HP, 115V, 60 HZ, 1 FASE
RPM: 1,100/850
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
OPEN BACK ASSEMBLY TABLE
PART: 12033-E – OPEN BACK ASSEMBLY TABLE - 4 X 8 FEET - CASTLEUsed in Good Condition
AMXmachinery
RETESTADORA
PARTE # 1RU-CH-CRM-05 - RETESTADORNUEVA CON GARANTIARETESTEADOR DE FORMAS MANUALAdecuada para el refilado de paneles Con formas y Redondeo Superio e inferior Accionamiento Manual Funcionamiento Manual
AMXmachinery
SIERRA RADIAL - JUNIOR 640CE - DISCO 15.75” - 4 HP - LARGO 21.5”
PARTE: 2MA-640CE -
SIERRA RADIAL - JUNIOR 640CE - DISCO 15.75” - 4 HP - LARGO 21.5”
NUEVA CON GARANTIAHeavy castings and the eight bearing saw
carriage makes this machine very accurate and rigid. European quality made to last!4 HP for 3-Phase Option, 3 HP for Single
Phase Option, 2800 RPM motor400 mm (15.75") Blade diameter (not
included)62.20" x 38.39" Table size21.5" Max crosscut length on 3/4"
thick material0 to 33.8" Rip capacity4.9" Max depth of cut15" Max cut length at 45 deg....
AMXmachinery
POSTFORMADORA
PARTE # 2EV-0190 - POSTFORMADORA - 12 PIES LARGO 1 LADO - EVANS 0190Para hacer dobles para Back Splash- 110V, 1 phase, 15 amps- 220V, 1 phase, 8 amps- Air: 80 PSI - 12' maximum capacity (3660 mm)- Back Splash Height: Minimum 1" (25 mm), Maximum 34" (860 mm) - Possible coving radios: 1/8" (3 mm) , 3/16" (5 mm), 3/8" (10 mm)- Crated weight 1800 LBS. - Shipping dimensions 182” long X 34” wide X 50” high- Bends inside cove bends for back splashes. The 0190 is available with either...