Identificador: 1998
Abierta
ID de articulo : # 1998 se ha agregado a su lista de deseos.
Descripción
PARTE: 12409 - RESACADORA DE TARIMAS - DOBLE - WEST PLAINS
USADA - BUENAS CONDICIONES
32"- 72", 480V, Operational
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
AFILADOR SIERRA CINTA 30-40 MM
PARTE # 2LSL-99990000506 - AFILADOR AUTOMATICO - ANCHOS 30-40 MMNUEVA CON GARANTIAAFILA SIERRAS DESDE 30 A 40 MM ANCHO EN 1 SOLA PASADAPARA DIENTES ENTRE 18 A 23 MMThe bandsaw blade grinder shall only be used for bandsaw blades with hardened saw teeth. The pitch shall be 25 mm and the bandsaw blade width shall be 32 mm.Motor Data, Grindlux 4000Voltage, V: 12Speed, rpm: 2800Peripheral speed, m/s: 22Power, W: 90Amperage, A: 7.5Grinding disc, mm: 150 x 6 x 16Fuse, A: 12 / 0.25Weight: 18.1 lbs. (8.2...
AMXmachinery
BASTONERA 1/2" - 2"
PARTE # 2TA-RM70 - BASTONERA PARA FABRICAR PALO REDONDO ESCOBA Y PERNOS Capacidad: Redondos de ½” a 2” de diámetro (10MM a 65 MM)Motor principal: 5 HP, 220V, 60 Hz, 3 fasesMotor alimentador: 1 HP, 220V, 60 Hz, 3 fasesVelocidad de corte: 2,900 RPMVelocidad de alimentación: de 6 a 21 metros por minuto (240” a 520” por minuto)Peso neto: 350 KGSPeso Bruto: 510 KGSTipo de empaque: 1 cajaMedidas de la Caja: 40” x 40” x 40”La maquina incluye cabezal para 7/8” con cuchillas de acer...
AMXmachinery
PART: AMX-10055-E - AUTOMATIC HANGER MACHINE - CRAFT INC - COBRA AHM-01 - PICTURE FRAME MANUFACTURING
PART:
AMX-10055-E - AUTOMATIC HANGER MACHINE - CRAFT INC - COBRA AHM-01 - PICTURE FRAME
MANUFACTURING
USED
– GOOD CONDITION - Sold as is - Where it isBrand:
Craft Inc. from South Attleboro MassachusettsModel: COBRA AHM-01Serial: 079127V, CE36
reels included with approximate 6000 hangers each reelMachine
dimensions: 72” length x 26” wide x 62” height Shipping
dimensions:Machine:
32” width x 79” length x 66” height - wood palletReels:
28” width x 30” depth x 60” he...
AMXmachinery
SIERRA VERTICAL ELCON CON NAVAJA
PARTE: 4EL-LANCET - SIERRA VERTICAL - CON NAVAJA - ELCONHow to improve/speed up the processing of multiwall polycarbonate sheets?By using a static knife instead of a sawblade. This reduces the amount of time spent on cleaning out the channels. The static knife delivers precise and clean cuts, without chips. Thus reducing wasting time on the post-processing. Some of the companies owning a Lancet reported up to 75% time saved.The Elcon Lancet is another #custombuilt solution that very few people...