Identificador: 1999
Abierta
ID de articulo : # 1999 se ha agregado a su lista de deseos.
Descripción
PARTE: 12410 - REASERRADORA - 2 BANDAS - ARRIBA Y ABAJO - SMITH
Usada - Buenas Condiciones
480V
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
MEDIDOR DE HUMEDAD PARA MADERA – CON 2 PINS - LIGNOMAT – MINI-LIGNO E/D
PARTE: 2LI-ED-0 - MEDIDOR DE HUMEDAD PARA MADERA – CON 2 PINS - LIGNOMAT – MINI-LIGNO E/DNuevo con garantíaMeasuringRange6-45%DisplayBright LED display with 0.1% resolution below 10% and 1% steps above 10%. Lifetime warranty for the most durable display.SpeciesCorrections2 Wood groups for softwoods and hardwoods, wood-based panel productsCalibrationStable calibration not affected by ambient temperature. Calibration is internally checked and automatically adjusted if necessary. All mini-Li...
4,500.00 MXN
AMXmachinery
ROUTER DE PEDESTAL – 10 HP – GARGANTA 29-1/2”
PARTE: 2NC-NT750-10 - ROUTER DE PEDESTAL – 10 HP – GARGANTA
29-1/2”
Nuevo con garantía
10 HP spindle drive motor
Chuck to tabletop maximum:
7-1/2"
Throat clearance: 750mm
(29-1/2'')
2 Speed Spindle: 8,100 /
16,300 RPM
Spindle travel: 95mm (3-3/4)
Depth stops: 6 position
turret stops, adjustable
Table travel: 190mm (7-1/2'')
Table surface area: 915mm x
101mm (36" x 40")
Table tilt: 45 degree front
downward tilt
Micrometric table raise:
1/32" (1mm) p...
AMXmachinery
TALADRO MULTIPLE HORIZONTAL
PARTE # 2TA-BR-52 – TALADRO MULTIPLE HORIZONTAL DE 1 LADO – 50” LARGONew with warrantySuitable and affordable for industrial and small workshop use.Capable of using "multiple drill head" for the drill distance less then 2".Easily adjust the drill position and add more drill spindles.Pneumatic clamp and drill head travel operated by foot pedal, hands free.Pneumatic and hydraulically stroke control for max. drilling power.Each spindle can be horizontally adjusted in position quickly.Cast iro...
AMXmachinery
PARTE: 3MA-ULTRAWII - CEPILLO 2 CARAS - 250 MM ANCHO - 3 HP - MARUNAKA
PARTE:
3MA-ULTRAWII - CEPILLO 2 CARAS - 250 MM ANCHO - 3 HP - MARUNAKA
NUEVO CON GARANTIAOne way feeding onlyWork width: 250 mm (25 degrees), 55 mm (60 degrees)Work Height: 180 mm
Knife bias angle: 0 - 60 degrees variableFeed speed: 88 m/min (60hz), 73 m/min (50hz)Feed motor : 2.2Kw x 2 motors
Head up/down motor: 0.2 Kw2 knife stocks on top and bottom surfacesKnife type: Changing blade typeKnife size: 335 length x 66 x 8 mmAccessories: Changing blades and standard toolsMachine size: (WxLxH...