Identificador: 2036
Abierta
ID de articulo : # 2036 se ha agregado a su lista de deseos.
Descripción
PARTE: 12420 – SIERRA OPTIMIZADORA – DIMTER WEINIG OPTICUT 260
USADA – MUY BUENAS CONDICIONES
Year of Manufacture: 2018
Condition: Excellent
Electric: 460 Voltage 60 Cycle 3 Phase
GREAT CONDITION HIGH SPEED INFEED 750 FPM. LESS THAN 1000 HOURS ON THIS MACHINE.
Working dimensions:
Cross section
min./max 0.48"- 10.23" width; .25" - 3.15" thickness.
Min. part length 5.5" cut.
Length min/max 15.75"- 16'0".
Motor: 10 HP vario speed to reduce board gap; servo controlled up to 825 FPM.
Saw: Blade dia. 20": auto waste gate for waste: Length measurement by flourscent camera.
Software: OptiCom Pro controller with 15" screen: Optimization of (3) grades.
Infeed/Outfeed: 16' Infeed with (2) marking stations; 33' outfeed with 5 kickers for length sort.
Note: Machine has been dismantled and packaged by Dimter tech.
Seller indicates less than 1000 hours on the machine.
Machine available to ship immediately!
Weight: 8000 lbs
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
LIJADORA - CALIBRADORA - BANDA ANCHA – 3 LIJAS - 53” ANCHO
PARTE: 12688 - LIJADORA - CALIBRADORA - BANDA ANCHA
– 3 LIJAS - 53” ANCHO
CEMCO
Usada - Buenas condiciones
Width
capacity 53”. Drum, Drum, Combination Head (see sander specs)
Head 1:
Rubber covered contact roll, 10” dia, 65 shore adjustable with dial
Head 2:
Rubber covered contact roll, 10” dia, 65 shore adjustable w/dial
Head 3:
Combination head, (2) 5-1/2” finishing drums w/platen
440 V, 60
cy, 3 Phase
Year 2000
Machine
weighs app 6000 lbs
...
AMXmachinery
SARGENTOS - ESTANDARD - 3.5” ALTURA - 36” CAPACIDAD
PARTE:
2JT-812-B-M1-3.5J-36L-H-C - SARGENTOS - ESTANDARD - 3.5” ALTURA - 36” CAPACIDAD
Nuevo con garantía
AMXmachinery
SIERRA ESCUADRADORA SCM MINIMAX S315WS
PARTE # AMX-10054 - SIERRA ESCUADRADORA – SCM - MINIMAX S315WSEN MUY BUENAS CONDICIONESLA MAQUINA ESTA COMPLETA Y YA DESARMADA LISTA PARA ENVIO EN SU TARIMA DE MADERAMOTOR: 5 HP, 230V, 60HZDISCO PRINCIPAL: DIAMETRO 12” (315 MM MAX) FLECHA 30 MM, 4200 RPM - INSTALADODISCO INCISOR: DIAMETRO 4-3/4” (120MM), Z 20, FLECHA 20 MM, 9300 RPM - INSTALADOLARGO CARRO: 3200 mm (126”)LARGO AGARRADERA DEL CARRO: 360 mm (14”)LARGO CARRO TOTAL: 3560 mm (140”)MODELO: 2005HECHA EN ITALIAPESO MAQUINA: 5...
AMXmachinery
PARTE: 12538 - CALDERA DE AGUA - LEFLAM - 521-050
PARTE: 12538 - CALDERA DE AGUA - LEFLAM - 521-050
MARCA: LEFLAM
MODELO: 521-050
CAP: 50000 KCAL/HR
PMT: 7 KG/CM2
INCLUYE EL QUEMADOR:
ECO FLAM GT-D1-MBC65DLE-RP15-40-120
MAX GAS 70 P TL HT