Identificador: 2072
Abierta
ID de articulo : # 2072 se ha agregado a su lista de deseos.
Descripción
PARTE: 2EN-E2410 - COLECTOR ASERRIN - MOTOR 10 HP - 5,000 CFM
NUEVO CON GARANTIA
• Fan 10 HP
• 5,000 CFM
• Total Static Pressure 8"wg
• Filter Bags/Area qty/SF 24/371
• Discharge 2 Bags
• Variable Frequency Drive (VFD) at 10 hp and 460V
• Add Pressure Transducer Kit Recommended with VFD
• Vibratory Cleaning Device (VCD) with 460 V momentary starter, Aids in filter cleaning
• Fan Inlet Adapter with 4" Branch and Manual Gate
• Shop Vac Hose Kit 4" x 15' Flex Hose Recommended with Fan Inlet Adapter
• Pre Wired Electrical Package Unistrut Mount Disconnect L22 Plug
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
EXTRACTOR SOPLADOR DIRECTO
PARTE: 1AM - EXTRACTOR SOPLADOR DIRECTO
Modelo
HP
Volumen
PCM MC/HR
12AI-XTAD-16
1/2
4,200
7,136
12AI-XTAD-20
3/4
8,170
13,880
12AI-XTAD-24
1 1/2
14,530
24,686
12AI-XTAD-26
2
18,725
31,814
AMXmachinery
PARTE: 12059 - SIERRA MULTIPLE - DE VAIVEN
PARTE: 12059 - SIERRA MULTIPLE - DE VAIVENUsada - Muy buenas condicionesFeatures and Specifications:Saw capacity of 6" width x 8" vertical capacity. Minimum working 2” high X 12” long. Main drive motor to saw frame is 30HP 3PH, wired 460 VServo drive system to feed works is 1/4HP 3PHBlower to saw frame rack for added cleaning value is 3HP 3PHBody of frame saw is (2) sections allowing for fast access to the saw frameSaw blade speed is fixed at 550RPMDust extraction requires min 3000 CFM and...
AMXmachinery
TEMPLATE MAKER - AREA TRABAJO 8” x 12” - TEMPLATE MAKERS
PARTE: 12368 - TEMPLATE MAKER - AREA TRABAJO 8” x 12” - TEMPLATE
MAKERS
NUEVO - NUNCA USADOInformation from manufacturer:For making templates for grinding
moulder knives. it have never been out of the original packing, So basically
brand new without warranty Here is the web site to the company that the machine
was purchased from a few years ago
http://www.templatemakers.com/cnc_technology/ So you can grind the moulder
knives. fully loaded machine . All the bells and whistles. revers...
AMXmachinery
SIERRA CINTA – VOLANTES 36” – 20 HP - CON ALIMENTADOR – STENNER
PARTE: 12227 – SIERRA CINTA – VOLANTES 36” – 20 HP - CON
ALIMENTADOR – STENNER
USADA – MUY BUENAS CONDICIONES
Wheel
Diameter: 36"
Max.
Bandsaw Width: 100mm
Maximum
Depth of Cut: 370mm
Saw
Motor: 20 HP, 230/460v, 3ph
Feed
Motor: 0.55 HP, 230/460v, 3ph
Feed
Speeds: 7.5, 15, 22.5, and 30 m/min (Need to Change Belt)
Table Size: 31" x 37"