Identificador: 2131
Abierta
Descripción
PARTE: 12456 - ENCHAPADORA DE CANTOS - HOLZ-HER SPRINT 1411-3
USADA - BUENAS CONDICIONES
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
LIJADORA DE TAMBORLIJADORA DE TAMBOR – 2 RODILLOS – 37” ANCHO - SUPER SANDER – 2 RODILLOS – 37” ANCHO - SUPER SANDER
PARTE # 11869 – LIJADORA DE TAMBOR – 2 RODILLOS – 37” ANCHO - SUPER SANDEREn buenas condicionesRodillos 100 cm de largoMotor 7.5 HP, 220V, 2 fasesMotor alimentador 1 HP, 220V, 2 fasesRPM 1760
AMXmachinery
CEPILLO 2 CARAS - ANCHO 24” - CANTEK
PARTE:
12408 - CEPILLO 2 CARAS - ANCHO 24” - CANTEK
USADO - EN BUENAS
CONDICIONES
Top cutterhead motor 30 HP 460 volts Helical cutterhead
Bottom cutterhead motor 25 HP 460 volts straight knife
cutterhead
Feed motor 5 HP on spike carpet feed system 25 to 95 fpm
Digital control panel
Capacity 3/8” to 6-1/2” thickness
Max lumber width 24”
Min lumber length 15”
AMXmachinery
MOLDURADORA 4 CABEZALES
PARTE # 32QD-MB4013GH - MOLDURADORA 4 CABEZALES - 20-130 MM ANCHOPARTE # 32QD-MB4016GH - MOLDURADORA 4 CABEZALES - 20-160 MM ANCHOPARTE # 32QD-MB4018GH - MOLDURADORA 4 CABEZALES - 20-180 MM ANCHOPARTE # 32QD-MB4023GH - MOLDURADORA 4 CABEZALES - 20-230 MM ANCHOFEATURESModel32QD-MB4013GH32QD-MB4016GH32QD-MB4018GH32QD-MB4023GHPlaning width20-130mm20-160mm20-180mm20-230mmPlaning thickness10-100mm10-100mm10-100mm10-100mmFeeding speed10-30m/min10-30m/min10-30m/min10-30m/minSpindle speed6000rpm6000rpm6...
AMXmachinery
PARTE: 12608 - SIERRA RAJADORA – 1 SIERRA – NORTHTECH SRS-12
PARTE: 12608 - SIERRA RAJADORA – 1 SIERRA – NORTHTECH SRS-12Usada – Buenas condicionesManufacturer’s Specification 15 HP Motor + 1 HP feed motor (with Wye Delta soft start)Mechanical variable speed (45′ – 100′ FPM) provides a speed range for all material types and thickness ranges of 3/16”- 3-1/2”.Bottom & top kickback fingersRack and pinion fence for precise and quick positioningDigital electronic oiler provides maximum chain and race life15-1/2″ distance from column to bla...