Identificador: 2224
Abierta
ID de articulo : # 2224 se ha agregado a su lista de deseos.
Descripción
PARTE: 12508 - CENTRO DE MAQUINADO VERTICAL – CNC – HAAS EC-550
USADO – BUENAS CONDICIONES
2008 HAAS EC-550
FULL 4TH AXIS, 10,000 RPM SPINDLE
THRU SPINDLE COOLANT, RENISHAW PROBING
CAT 50, 72 TOOL POSITIONS
IN PLANT, UNDER POWER, AVAILABLE IMMEDIATELY
Specifications:
PALLET WIDTH 21.6"
PALLET LENGTH 21.6"
PALLET INDEXING FULL 4TH
X-AXIS TRAVEL 30"
Y-AXIS TRAVEL 34"
Z-AXIS TRAVEL 32"
SPINDLE SPEED 10,000 RPM
SPINDLE MOTOR 45 hp
SPINDLE TAPER CAT 50
TOOL POSITIONS (ATC) 72
Equipped With:
FULL 4TH AXIS
HIGH-PRESSURE THROUGH-SPINDLE COOLANT (1,000 PSI)
RENISHAW WIRELESS INTUITIVE PROBING SYSTEM (WIPS)
72-POSITION TOOL CHANGER
10,000 RPM SPINDLE (CAT50)
CHIP CONVEYOR
REMOTE JOG HANDLE
PROGRAMMABLE COOLANT
SECOND HOME POSITION
COORDINATE ROTATION & SCALING
SPINDLE ORIENTATION
RIGID TAPPING
QUICK CODE
MACROS
USB PORT
EARLY POWER-FAILURE DETECTION MODULE
** MACHINE RUNS (1) SHIFT A DAY
** HOURS SCREEN IN THE CONTROL HAS BEEN RESET (SEE PHOTO)
** FULL REPLACEMENT COST, AS EQUIPPED - $350,000
** MACHINE CUT PRIMARILY BRASS & SOME ALUMINUM AND STEEL
** IN PLANT, UNDER POWER, AVAILABLE FOR IMMEDIATE INSPECTION & PURCHASE
** MACHINE AVAILABLE TO BE REMOVED IN EARLY DECEMBER
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
LIMPIADORA DE TABLAS PARA TARIMAS – FROEDGE 450
PARTE # 11904 – LIMPIADORA DE TABLAS PARA TARIMAS – FROEDGE 450Good conditionElectric 230 volt, 60 cycle, 3 phaseUsed to clean dust of resawn boards prior to pallet assembly.Working dimensions: Up to 8" wide, up to 6" thick and up to 8' in length.Infeed: Infeed belt conveyor 6" wide.Powered brushes to clean the boards top and bottom.Powered by 5 HP motor.Shipping 8 (length) x 5 (width) x 5 (height)Weight 1800 lbs
AMXmachinery
PARTE: 1AM-1200 - REASERRADORA 1 CINTA – CAPACIDAD 10” ANCHO X 5” ALTO – AMX MACHINERY
PARTE:
1AM-1200 - REASERRADORA 1 CINTA – CAPACIDAD 10” ANCHO X 5” ALTO – AMX MACHINERYNueva con garantíaCapacidad de corte máximo: 10” ancho x 5” altoSierra cinta: 131” largo x 1-1/4” ancho - paso 7/8” para
tabletear madera pinoBanda: 160” x 10” anchoMotor principal: 10 HP, 220/440V, 3 fases,
conectado a 220VMotor avance: 2 HP, 220/440V, 3 fases, conectado a 220VMedidas totales: 68” ancho x 80” fondo x 63” alto
Medidas totales de e...
AMXmachinery
PARTE: 12622 - LIJADORA DE CEPILLO – 39” ANCHO - ALPHA BRUCH
PARTE: 12622 - LIJADORA DE CEPILLO – 39” ANCHO - ALPHA BRUCHUSADA – MUY BUENAS CONDICIONESMarca Alpha BrushModelo KS-MSMfg 2017Voltage 200-230VMax working width 1000mm (39") Key Features of the KS-MS Brush Sander:Equipped with two top sanding drums. Capable of sanding wood, metal, plastic, and composites.Adjustable Speeds:Sanding Drums: Variable rotation speed.Conveyor: Separate adjustable speed control for the conveyor belt.Features a fast "change out" system for switching brushes for d...
AMXmachinery
TALADRO MULTIPLE VERTICAL NEUMATICO
PARTE: 2MK-LBP13 – TALADRO MULTIPLE VERTICAL – 13 TALADROS - NEUMATICOProvide features that offer a longer life, such as the Lubricated Aluminum Head (versus a sheet metal head) and Heat treated Steel Gears (versus plastic gears). With a 1 HP motor (versus standard 3/4 HP in most models) and Stainless Steel Spindles (versus steel spindles), these boring machines offer carpenters and woodworkers the opportunity to work with the most innovative bench top boring machine currently on the market!...