Identificador: 2278
Abierta
ID de articulo : # 2278 se ha agregado a su lista de deseos.
PARTE: 2SC-2910 - CADENA DE ALIMENTACION - SIERRA MULTIPLE SCMI - M3
AMXmachinery
Descripción
PARTE: 2SC-2910 - CADENA DE ALIMENTACION - SIERRA MULTIPLE SCMI - M3
Guías incluidas
Nueva con Garantia
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
SIERRA ESCUADRADORA VERTICAL - COMPACT PLUS - CAP. 122” X 65” X 2-3/8”
PARTE: 2ST-COMPACTPLUS - SIERRA ESCUADRADORA
VERTICAL - COMPACT - CAP. 181” X 65” X 2-3/8”
NUEVA CON GARANTIAAll of the above, plus:• 15’1” cut length• Split full-length center shelf useful for
staging material• Y-axis digital measuring for horizontal cuts• Six template bar stops for setting common
rip cutsOptional:- For longer XL (6164) frame to cross-cut
17’6”- For taller (207) frames to cross-cut
6’9-1/2”
- For tallest (220) fr...
AMXmachinery
PARTE: 12663 - COLECTOR DE ASERRIN - MOTOR 10 HP - NEDERMAN
PARTE: 12663 - COLECTOR DE ASERRIN - MOTOR 10 HP - NEDERMAN
Usado - Muy Buenas Condiciones
Modelo: NFP-S1000
Tested and works
as it should.
Does not include
the catch / waste bags
Total filtration
area 360 ft2
See attached PDF
for all specs
Year 2018
230/460V 3PH
AMXmachinery
PRENSA - GRABADORA DE MOLDURAS – DIFERENTS DISENOS – 2 MAQUINAS
PARTE: 12243 – PRENSA - GRABADORA
DE MOLDURAS – DIFERENTS DISENOS – 2 MAQUINAS
USADA – BUENAS CONDICIONES
Mfg
1981
Electric 230 volt, 60 cycle, 3 phase
Press
width 450mm (17.71")
Material
max width 500mm (19.68")
Material
Speed 200-1000 Meters per hr. (650 -
3200 ft)
Engraving
depth 3mm
Dual
propane torch heaters
Includes
Wheels as shown (100 - 250 mm diameter wheels)
Shipping
Footprint: 6 (length) x 6 (width) x 5 (height)
Weight: 25...
-500x500.jpg)
AMXmachinery
LIJADORA DE CEPILLOS QUICKWOOD
PARTE: 11799 – LIJADORA DE CEPILLOS – QUICKWOODGOOD CONDITIONS- MODEL: RO-1100- (460/60/3 electrics)- 44" wide x 4" thick max. work-piece dimensions- (2) counter-rotating "carrousels" with (4) rotating sanding heads each- (8) rotating "hex" spindles can be equipped with a variety of materials- (3 to 16) RPM of carrousel and (300 to 1,200) RPM variable spindles- Electronic digital speed readouts- (33) 5" diameter "quick discs" per spindle, (264) total- 6 HP main motors, 1.5 HP rotation motors...