Identificador: 2284
Abierta
ID de articulo : # 2284 se ha agregado a su lista de deseos.
Descripción
PARTE: 12527 - ENCHAPADORA DE CANTOS - BIESSE AKRON 1435A
USADA – MUY BUENAS CONDICIONES
Year: 2018
CAPABILITIES
-One-sided edgebander with glue pot
-CNC control and command system with TS10 digital controller, large ``touch screenLCD graphic display, WINDOWS CE operating system, USB port
-Chain drive and upper presser
-Group of pressure rollers
Workstation :
-Premilling
-Gluing unit with pellet pot
-Adjustable pneumatic pressure unit
-End cutting unit 2 tilting saws 0-15˚ for bevel cutting, motor 0.50Kw
-Fine trimming top and bottom trimming unit, 0.65Kw motor
-Radius scraper unit for 3mm pvc finishing
-Polishing brush unit, 0.37Kw motor
Specifications:
-Minimum & maximum thickness of the part: 10 to 60mm
-Minimum width of the part: 85mm
-Minimum piece length: 140mm
-Tape thickness in roll: 0.4 to 3mm
-Thickness of the pre-cut wooden strip: up to 8mm x 45mm high
-Variable feed speed: up to 12m/min
-Edgebander length 16` and 6 inches
-Automatic start of the groups and motors foreseen in the program.
-2nd pass direct selection key.
-Management of 8 digital axes
-Lists of programs with manual and/or automatic launch.
-Diagnosis of errors with codes and comments.
-Statistical production data.
-This device is mounted on an adjustable suspended control panel
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
EXTRACTOR DE TURBINA - 1 HP - S&P
PARTE: AMX-10135 - EXTRACTOR DE TURBINA - 1 HP - S&P
USADO - BUENAS CONDICIONES
MEDIDAS: ANCHO 20” X 12” FONDO X
18” ALTO
ENTRADA REDONDA 5”
SALIDA REDONDA 4-3/4”
1 HP, 220/440V, 3 FASES
6,500.00 MXN
AMXmachinery
AFILADORA DE CUCHILLAS PARA MOLDURADORA
PARTE: 2TA-TG-9330 - AFILADORA
DE CUCHILLAS PARA MOLDURADORA
NUEVA CON GARANTIAFEATURES:
Economical model for small shop.
Work table back to front, left to right is moved on linear
bearing cross roller rail sets, accuracy and durability.
Grinding wheel head is micro adjustable and accurate. 2 HP
variable speed control motor for powerful grinding.
Easy setup template holder for accurate copy tracer.
Knife-edge angle is adjusted by dovetails are grooved;
grindin...
AMXmachinery
TALLADORA DE MADERA
PARTE: 2CA-CM-8CAR - TALLADORA DE MADERAFeatures:Special design 3D carving machine by menu copy with template for wood, artistic, and plastic, etc.Fix the template at middle axis, the other 8 axis spindle will follow it and carving the material when it is automatic rotated 360 degrees.The spindle motor controlled by high frequency inverter from 9,000 to 12,000 RPM for best carving effects.Cutter head can be adjusted at x or y direction.Carving angle can be adjusted at 30 to 120 degrees.Custom o...
-500x500.jpg)
AMXmachinery
GUIA PARA MEDIDAS - SIERRAS TRONZADORAS, TROCEROS, PENDULOS
PARTE: AMX-10179 - GUIA PARA MEDIDAS - SIERRAS TRONZADORAS, TROCEROS, PENDULOSUSADA - BUENAS CONDICIONESMARCA: INDUSTRIAL - ESTABA EN UNA SIERRA MARCA INDUSTRIAL6 TOPES AJUSTABLES PARA PONER MEDIDAS MEDIDAS TOTALES:4” ANCHO X 87” LARGO X 9” ALTO10 CM ANCHO X 221 CM LARGO X 23 CM ALTO========================================================================PARTE: AMX-10178 - TRANSPORTADOR DE RODILLOS - 120” LARGO -
SIERRAS TRONZADORAS, TROCEROS, PENDULOS
USADO
- BUENAS CONDICIONES
...