Identificador: 236
Abierta
ID de articulo : # 236 se ha agregado a su lista de deseos.
Descripción
PARTE # 2SM-72550 - LIJADORA DE 1 TAMBORES - 25”- 50” DE ANCHO
SPECIFICATIONS
Sanding Capacity: | Maximum Width (in): 50 (two passes) |
Dimensions (in): | 46L x 27W x 53H (on stand) |
Drum: | 5 x 25 extruded aluminum |
Drum Speed: | 1740 RPM |
Dust Hood: | 1- 4″ vacuum port, min. 600 CFM recommended |
Conveyor Motor: | 43 in.-lb. torque, direct drive D.C. motor, ranged variable 0-10 FPM |
Drive Motor (TEFC): | 1-3/4 HP |
Power Requirements | 110 V 20 amp |
Shipping Weight (lbs): | 369 (3 boxes incl. stand) |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12521 - SIERRA DE MESA – DISCO 10” – DELTA UNISAW
PARTE: 12521 - SIERRA DE MESA – DISCO 10” – DELTA UNISAW
USADA - BUENAS CONDICIONES
AMXmachinery
PRENSA DE TABLEROS – 20 SECCIONES – TAYLOR
PARTE # 11913 - PRENSA DE TABLEROS – 20 SECCIONES – TAYLOR8.5 ft. wide with approximately 6 clamps per sectionClamps are standard 2-1/2” high jaws by 32” openingIncludes air tightener and panel flattenerMachine was new in 1983Good conditions
AMXmachinery
BASE TROFEO 3 COLUMNAS
BASE TROFEO - 3 COLUMNAS5/8” espesor Madera Solida Color encino (OSCURO)
AMXmachinery
POSTFORMADORA EVANS 0100
PARTE: 12028 - POSTFORMADORA EVANS 0100USADA EN BUENAS CONDICIONES