Identificador: 2498
Abierta
ID de articulo : # 2498 se ha agregado a su lista de deseos.
.jpg)
.jpg)
.jpg)
Descripción
PARTE: 12575 - SEPARADOR DE MAGNETO - CROSSBELT
USADO - AS IS
Nuevo sin usar
Unused, “New” Conditions.
Medidas: 29 1/2” W x 70” L
Motor: 3 HP, 230/460V/3/60
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
SIERRA DE PANELES
PARTE # 2DO-CONCEPT-2600 - SIERRA DE PANELES AUTOMATICAAn Innovative and Surprisingly Affordable Beam / Panel Saw ... 100% Made in ItalyAs compared to a Sliding Table Saw or Vertical Panel Saw, Concept 350 is more accurate, is easier to operate, is much safer, and can be up to 3x more productive !Allows the small to mid-sized shop to advance with capacity and accuracy previously only available to larger operations with much larger machinery budgets. Occupies about the same footprint as a sl...
AMXmachinery
PARTE: 12446 - MOLDURADORA - 5 CABEZALES - PROFIMAT 235
PARTE: 12446 - MOLDURADORA -
5 CABEZALES - PROFIMAT 235
USADA - BUENAS CONDICIONES5 heads bottom, right, left, top, bottom9-1/16" x 4-11/16" capacity20-78 FPM variable feedMechanical readouts on all spindlespowered out feed rollerstraightening vane
Mfg: 1996440 volt, 3 phase, 60 cycle
AMXmachinery
HORNO PARA CERAMICA, VIDRIO, METALES – 19 LITROS
PARTE:
2PG-FUSION7 - HORNO PARA CERAMICA, VIDRIO, METALES – 19 LITROSNUEVO CON GARANTIAThe digital Sentry Xpress 3 key controller comes standard on all Fusion-series kilns. Control both heating and cooling with simple 3-key operation.The Sentry Xpress 3-key controller is packed with features. It includes two modes: Single Speed and 8-segment Ramp-Hold.Features of the Sentry Xpress 3-key Controller on Non-Ceramic Paragon KilnsDesign programs with up to 8 segments (steps) in Ramp-Hold mode.Fire...
-500x500.jpg)
AMXmachinery
TRISCADORA 10-80 MM
PART # 4VF-SV80MN - TRISCADORA PARA SIERRA CINTAS 10 -80 MMNueva con garantiaInexpensive and easy-to-use. Possibility to choose the setting: left/right or left/right/straight. Adjustment of the feed pitch, of the setting height and of the tooth bending degree. Workbench model.Bandsaw Thickness [min-max]: 0,5 – 1,1 mmBandsaw Width [min-max]: 10 – 80 mm Setting Pitch [min-max]: 5 – 35 mmTwo types of setting: Net – Gross Weight: 7 – 9 kgMachine Dimensions [D x W x H]:...