Identificador: 2553
Abierta
ID de articulo : # 2553 se ha agregado a su lista de deseos.
.PNG)
Descripción
CORTADORA DE METAL HIDRAULICA PARTE: 2GM-HS-1014MD
- Taiwan machines
- ISO 9001 certified
- HD all steel construction for maximum rigidity
- German logic quiet Rexroth hydraulic system
- Adjustable stroke from 16-20 strokes per minute
- 60” long squaring arm with inch / mm scale
- Spring hold-downs
- High grade carbon/chrome alloy steel blades and hardened to 62 hrc,
- 2-edge indexable upper blade and 2-edge indexable bottom blade
- Full length with full view finger guard
- Front supports and (2) side gauges
- Safety type foot pedal control
- Jog, single continuous auto operation modes
- One year warranty for parts
- 26” manual back gauge with inch/metric dual scale & one side operated hand wheel
- 60” long squaring arm with inch / mm scale
- 2 each 24” front support arms
- 2 each 14” Side gauges with inlaid inch/metric dual scale
- Spring independent hold-downs
- Full length finger guard
- Removable safety foot
Cutting capacity: mild steel stainless steel min. thickness | 10’ x 14Ga. 10’ x 18 Ga 26Ga. |
Blade length | 10’1” |
Strokes per minute adjustable | 14-18 |
Throat depth | 16” |
Worktable height | 30-1/2” |
Front support arm | 24” |
Back gauge, manual | 26” manual |
blade rake angle | 1.5 degree |
oil tank cap. | 20gal |
Main motor | 5-1/2 HP 220V/440V, 3PHASE |
Machine weight | 5,200 LBS |
Machine dimensions | 139”X35”52” |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
ESTACION DE CORTE Y BARRENADO
ESTACION DE CORTE Y BARRENADO• Precise cutting to length• Drilling 2 sides: (left and right side)• Doweling (left and right side)• Drilling from the top and underneath• Dividing and grooving• Cleaning and return transport to the operatorThis line is well suited for processing of plinths,drawers and similar items, that are used in the kitchenand furniture industry.Length:250 – 2200 mmHeight:10 – 80 mmWidth:25 – 250 mm
-500x500.jpg)
AMXmachinery1
EXTRACTOR VENTILADOR TUBOAXIAL CON BASE
PARTE: 1AM - EXTRACTOR VENTILADOR TUBOAXIAL CON BASEPara uso de ventilación directa sobre maquinarias, motores, operadores, zonas de trabajo, secadores, fundiciones, etc.Carcasa tubular fabricada en acero al carbón con aplicación de pintura electrostática y horneada. Rejilla de protección electro soldada. Hélice de aluminio anti-chispa.Características:– Aspa con diámetros de 16,20, 24 y 26″.– Volúmenes de aire desde 4,200 hasta 18,725 PCM.Usos:– Ventilación directa sobre maquin...
AMXmachinery1
SIERRA MULTIPLE - DIAMETRO DISCOS 12”
PARTE: 2NT-NT-MRS12N - SIERRA MULTIPLE - DIAMETRO DISCOS
12”The NT MRS12N Multiple Rip Saw features a cast iron frame that houses a variable speed dip chain for premium rip capability. Often referred to as gang rip saws, this machine is fitted with closer fitting upper hold down rollers the MRS12N boasts the shortest part feeding on a multiple rip saw. The MRS12N uses 12″ diameter rip saw blades and can be equipped with power raise and lower, invertor speed control and non marking urethane ...
AMXmachinery1
SIERRA VERTICAL - 64" ALTO X 120" ANCHO
PARTE: 2SS-7000 - SIERRA VERTICAL - 64" ALTO X 120" ANCHOHeavy duty induction motors allow for cutting all day with an option of single or three phase power. All of our machines are built to last; gives you that extra motor efficiency with little to no maintenance required. Longevity is made possible by high induction motors supported by US precision machined components.The Panel Saw cuts horizontally and vertically, within .015” straight and square, and has a maximum panel thickness of 2”...