Identificador: 2608
Abierta
ID de articulo : # 2608 se ha agregado a su lista de deseos.
.PNG)
.PNG)
.PNG)
.PNG)
.PNG)
Descripción
CORTADORA DE METAL HIDRAULICA Y FRENO 6 PIES PARTE: 2GM-HBB-0610
Our 6 FT Sheet Metal Hydraulic Box and Pan Brake is a heavy duty hydraulic box and pan brake; constructed of steel for maximum rigidity. Equipped with a robust and quiet German Rexroth hydraulic logic system to clamp your workpiece with ease. Our box and pan brakes are made for simple operation with a conveniently located control panel to place on either side of the hydraulic brake.
- Taiwan Machines
- ISO 9001 certified
- Hydraulic adjustment for opening
- Hydraulic power clamping for workpiece
- 26” manual back gauge with handwheel
- 1” manual beam adjustment ( front and back )
- Min. reverse bend is ¾” (20mm)
- Heavy welded all steel construction for maximum rigidity
- Germany Rexroth Hydraulic logic system centrally located and quiet
- A wide guidebody ensures strong, stable, smooth & accurate movement
- Total pieces fingers assortment:
- 3”/6pcs, 4”/3pcs, 5”/6pcs, 6”/2pcs
- Central control panels on each side for convenient operation
- Jog and auto operation modes
- Overload protection and disconnect switch
- Assorted fingers
- 26” manual back gauge with one side handwheel operation
- Angle set up dial
- Hydraulic clamping system
- Foot pedal control for hydraulic clamping & auto mode
Max Bending Length: | 6’ |
Bending Capacity: Mild Steel (hot roll) 60k PSI Stainless Steel 85k PSI soft aluminum 28K PSI Minimum material thickness |
10 Ga. 12 Ga. 1/4" 26Ga. |
Opening hem max thickness Closing hem max thickness | 20Ga x 6' 22Ga x 6' |
Bend Degree: | 135 |
Max. Box Depth: | 153mm=6.02” |
Large Beam Opening: | 3" |
Manual Back Gauge: | 26” |
Oil Tank Gal. | 12 Gal. |
Hydraulic Oil: | Shell #68 or equivalent |
Main Motor | 5 HP 3 Phase Prewired: 220VAC 15A Optional: 440VAC 10A |
Weight | 5,000 lbs. |
Shipping Weight: | 5,050 lbs. |
Overall Dimensions | 91" x 46" x 67" |
Shipping Dimensions: | 105” x 40” x 66” |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.jpg)
AMXmachinery1
MOLDURADORA - 5 CABEZALES - 7” ANCHO - LEADERMAC LMC 518S SMARTMAC
PARTE: 2CK- LMC-518S - MOLDURADORA
- 5 CABEZALES - 7” ANCHO - LEADERMAC LMC 518S SMARTMAC
SPECIFICATIONS
Thickness of material
.4”(to ¼” optional) to 5”
Width of material
.6” to 7” (8” optional)
Min lenght of material
8” (butt fed)
Axial Adjust (side heads)
.8” (20 mm)
Axial Adjust
(top/btm heads)
.8” (20
m...
-500x500.png)
AMXmachinery1
TALADRADORA 32 mm, 21 CABEZALES
TALADRADORA 32 mm, 21 CABEZALES PARTE: 2CK-JB21PIs designed to speed up your line drilling operations. It has a total of 21-spindles based on a 32mm centers. The spring-loaded index pin allows for accurate and convenient continuous line drilling operations. The precision rear aluminum fence with linear scale and (2) flip stops allow for precise and convenient setup. The complete back fence can be adjusted for various measurements from the edge of the panel to the holes. The precisio...
AMXmachinery1
CEPILLO 2 CARAS 25" X 8"/16"/20"/24"
CEPILLO 2 CARAS 25" 2CK-GT635ARDHas a robust cast-iron body for industrial planing day in and day out. The spiral insert knife cutterheads produce a smooth planed finish with maximum stock removal. The material is passed over the bottom head with a spring-loaded pin feed system while the infeed bed is adjustable to determine how much material is removed. The final thickness is keyed in the digital control and the top head & feed assembly automatically move in place. Spring loade...
AMXmachinery1
SIERRA MULTIPLE - 1 SIERRA - 14 PULGADAS
PARTE: 2CK-SRS330Is a single-blade ripsaw is geared towards the shop looking to increase efficiency in their ripping operations but cannot justify a multi-blade ripsaw. With its precision cast iron chain and track assembly, and extended pressure section, the SRS330 can produce a glue joint finish ready for panel glue-up right out of the saw.Produces a guaranteed glue joint finish to 13′, which eliminates the need to joint the material after rippingPrecision straight line feeding for parallel...