Identificador: 2627
Abierta
ID de articulo : # 2627 se ha agregado a su lista de deseos.
Descripción
PARTE: 12597 - TRITURADORA - BLOAPCO - MODELO 7-6
USADO – BUENAS CONDICIONES - RECONSTRUIDO
Max trim width 7.5"
Shear Cutting Action
Rotor Speed 500 to 3,600 rpm
1 HP motor
Model 7-6 provides cutting via one stationary bed knife and two rotating knives provides two cuts per revolution.
The open-rotor design facilitates free passage of air and material.
Shear-cut action for paper and tough, thin film and foil.
Total weight is 135 pounds
17"L x 13.25W x 22.5H
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
VENTILADOR DE PEDESTAL
PARTE: 1AM - VENTILADOR DE AIRE DE PEDESTAL
Modelo
HP
Consumo
WATTS
Diámetro de
Aspa
12AI-PP-18
1/8
93
18”
12AI-PP-9000
1/4
220
30”
12AI-PP-9000-MG
1/4
220
30”
AMXmachinery
PARTE: 12258 - TALADRO MULTIPLE - SCMI - STARTECH 23
PARTE: 12258 - TALADRO MULTIPLE -
SCMI - STARTECH 23
USADA - BUENAS CONDICIONES
MFG. 1999
495 KG
230V, 3 FASES, 60 HZ, 10 AMP
-500x500.jpg)
AMXmachinery
REASERRADORA 5 SIERRAS 12"
PARTE # 2TA-BS-1212HR-5 - REASERRADORA HORIZONTAL - 5 SIERRASNUEVA CON GARANTIASpecificationsBS-1212HR-TNBS-1616HR-TNMax. Cutting Capacity12" x 12"16" x 16"Distance between Blade to Conveyor1/4" ~ 12"Saw Wheel Diameter28" x 2Saw Blade Length (Width)201" (2")201" (2" ~ 3")Saw Blade Speed6000 FPMFeed Conveyor Width12"16"Feed Speed (Variable)0 ~ 90 FPMMain Motor (Each Head)20 HP x 230 HP x 2Saw Blade Lift Motor1/2 HPFeed Conveyor Motor3 HPDust Hood4" x 6N. W.7200 LBS8600 LBSMachine was built with r...
AMXmachinery
PARTE: 12555 - SIERRA TRONZADORA - 10 HP - WHIRLWIND
PARTE: 12555 - SIERRA TRONZADORA - 10 HP - WHIRLWINDUSADA
- BUENAS CONDICIONES