Identificador: 2705
Abierta
ID de articulo : # 2705 se ha agregado a su lista de deseos.
PARTE: 12634 - COMPACTADORA / EMBALADORA – PAPEL - CARTON – HORIZONTAL – 30 HP
AMXmachinery
Descripción
PARTE: 12634 - COMPACTADORA / EMBALADORA – PAPEL - CARTON – HORIZONTAL – 30 HP
USADA – MUY BIENAS CONDICIONES
Manufacturer: Balemaster
Model: 4030G-8
Serial: 09407B
HP: 30HP
Cylinder: 8"
Bale Size: 30"W x 36"H x Variable
Feed Chute: 34"x40"
Auto tie
Manufacture Year: 2009
Low bale count and running hours
Great operating condition
The conveyor and shredder are currently not available
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
ASTILLADOR - 75 HP - BAJA VELOCIDAD - WEIMA
PARTE: 12406 - ASTILLADOR - 75 HP - BAJA VELOCIDAD - WEIMA
Usado - Buenas Condiciones2004
Model WLK 13/75 Low Speed, Hopper StyleBatch
style with 75 HP low speed rotor, top feed hopper, self contained hydraulic
system with hydraulic ram, and controls.
Controls
operate the ram which forces material against the low speed rotor. Controls
vary the hydraulic pressure based upon the load on the rotor motor.
Features
reversible carbide cutters on large diameter rot...
AMXmachinery
ENLAZADORA DE CAJONES - DODDS
PARTE:
12369 - ENLAZADORA DE CAJONES - DODDS
MUY BUENAS CONDICIONES -
COMO NUEVABrand: DoddsModel: SE-1-25AFCondition: Very GoodYear: 2019Voltage: 220/1/Condition: Very GoodWith automatic feed of the cutter for dovetailing standard
English dovetails on one or two inch centerlines.Servomotors control the automatic feed with the consistency
and reliability of servo components.Simple operationSpindle movement controlled by servomotors.Touch screen operator interface.Servo controls for co...
-500x500.jpg)
AMXmachinery
TALADRO MULTIPLE 23
PARTE # 2RT-R823 - TALADRO MULTIPLE - 23 TALADROSNUEVO CON GARANTIA23-Horizontal Gear Driven Spindles32mm Spindle Centers10 Mm Bored Collets(12) Right Hand, (11) Left Hand3,450 Spindle Rpm3 H.P. Spindle Drive Motor, TEFC0-2″ Adjustable Boring Depth20″ X 42″ Precision Ground TableBack Fence Lip(2) End Boring Fences(1) 5-Ton Carriage Adjusting Jack(4) 2.00″ Bore Clamping CylinderWired 3-Phase 480 Volt, 60 Hz.Foot Pedal Actuated Boring CycleNo Tooling IncludedDesigned And Manufactured In Th...
AMXmachinery
TALADRO MULTIPLE 21
PARTE # 1VT-ALFA21CLASSIC - TALADRO MULTIPLE 21 BROCASNUEVO CON GARANTIACantidad de mandriles: 21Peso neto aproximado: 264 KgDistancia entre centro de mandriles: 32 mmDistancia entre el primer y último mandril: 640 mmProfundidad máxima de taladrado: 75 mmDimensiones de la mesa: 860 x 500 mmDimensiones máximas de la pieza: 800x3000 mmVelocidad de los mandriles: 2800 r.p.mFuerza del motor: 2.5 H.P.Presion de aire requrida: 6.8