Identificador: 2717
Abierta
ID de articulo : # 2717 se ha agregado a su lista de deseos.
.jpg)
.jpg)
.jpg)
.jpg)
.JPG)
Descripción
PARTE 12630 - CONTORNEADORA - BALESTRINI - C70-N
USADA – BUENAS CONDICIONES
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.jpg)
AMXmachinery
OPEN BACK ASSEMBLY TABLE
PART: 12033-E – OPEN BACK ASSEMBLY TABLE - 4 X 8 FEET - CASTLEUsed in Good Condition
AMXmachinery
PARTE: 12440 - LIJADORA BANDA ANCHA – 1 LIJA - 37” ANCHO - CEMCO
PARTE: 12440 - LIJADORA BANDA ANCHA – 1 LIJA - 37” ANCHO - CEMCO
USADA - BUENAS CONDICIONESManufactured
in 1999•
Combination sanding head with 5 ½”contact
drum and 3 ½” platen• 20 HP
TEFC Dual Voltage Motor, 460Volt, 3
Phase, 28 Amps• Start,
Stop and E-Stop buttons withmagnetic
starter and locking disconnect• Motor
brake Via E-Stop• 1 HP
feed motor• 37” x
75” Sanding belts• Manual
variable feed speed, 15 – 60 fpm• Manual
thickness adjustment with re...
-500x500.jpg)
AMXmachinery
REASERRADORA 2 SIERRAS 16"
PARTE # 2TA-BS-1616HR-TN - REASERRADORA HORIZONTAL - 2 SIERRASNUEVA CON GARANTIASpecificationsBS-1212HR-TNBS-1616HR-TNMax. Cutting Capacity12" x 12"16" x 16"Distance between Blade to Conveyor1/4" ~ 12"Saw Wheel Diameter28" x 2Saw Blade Length (Width)201" (2")201" (2" ~ 3")Saw Blade Speed6000 FPMFeed Conveyor Width12"16"Feed Speed (Variable)0 ~ 90 FPMMain Motor (Each Head)20 HP x 230 HP x 2Saw Blade Lift Motor1/2 HPFeed Conveyor Motor3 HPDust Hood4" x 6N. W.7200 LBS8600 LBSMachine was built with ...
AMXmachinery
COMPRESOR DE TORNILLO - 50 HP
PARTE: 12341 - COMPRESOR DE TORNILLO - 50 HP
USADO - BUENAS CONDICIONES
230/460V
Nominal 100 PSI, 110 Maximum
Nominal 236 Cubic Feet Per Minute Depending on Pressure
Setting
Variable Frequency Drive
Weight: 3000 lbs
Dimensions: 48" L x 72" W x 64" H
Recently serviced and ready to go!