Identificador: 2805
Abierta
ID de articulo : # 2805 se ha agregado a su lista de deseos.
.PNG)
.PNG)
Descripción
PARTE: 2SS-WBS3760101 - LIJADORA CALIBRADORA 37" - BANDA ANCHA - 1 LIJA
Our American Made Wide Belt Sander will improve your finishing time, decrease your hand sanding and increase your productivity. Available with either a 10 horsepower, single phase or a 15 horsepower, three phase motor these American made wide belt sanders are workhorses that will likely outlive you.
Main Motor Options
- 10 Hp, Single Phase (1~), 220 Volt
- 15 Hp, 3 Phase (3~) 208 Volt / 230 Volt
- 460 Volt, 3 Phase (3~), 15 Hp
Wide Belt Sanders solve the most tedious challenge that woodworkers face!, the 37X60 Wide Belt Sander is built to last, including the following as standard equipment on this machine.
Standard Equipment
- Photo electric belt tracking.
- 2 1/2″ removable platen.
- 2 height adjustment indicators.
- 5 emergency stops.
- 2 rubber-covered pinch rollers 1 1/2″ OD.
- Rubber-covered contact roller 4 1/4″ OD with 13/8″ drive bearing.
- 2 machined idler rollers 2 3/16″ OD with 3/4″ bearings.
- Conveyor table set on four 3/4″ acme-threaded jackscrews
- Pneumatic belt tensioning.
- 3 year warranty.
- 6″ internal dust chute.
- 3/4 Hp conveyor motor
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.png)
AMXmachinery1
SIERRA VERTICAL - 74" ALTO X 64" ANCHO
PARTE: 2SS-C5 - SIERRA VERTICAL - 74" ALTO X 64" ANCHOThe portable panel saw features a 64″ maximum crosscut and cuts material up to 1.75″ thick. Photos are shown with a stand and wheels, which are optional accessories.Motor Horsepower, Amperage and Volts3.25 HP, 15 amp, 120 Volt3.25 HP, 7.5 amp, 220 VoltStandard EquipmentZinc plated 1 ¾” steel guide tubes.Milwaukee Tool motor4 Nylatron roller bearing systems.Adjustable vertical and horizontal rulers.Quick change from vertical to horizo...
AMXmachinery1
EXTRACTOR DE POLVOS - 5HP
PARTE: 2EX-DB-50.3 - EXTRACTOR DE POLVOS - 5HPOur dust blowers are made up of a heavy duty dynamically balanced vaneaxial fanwith safety guards on all inlets. The steel impeller is mounted directly to the shaft ofthe stand-mounted motor. Motors are available from 5 to 25 horsepower, 3 phaseelectric and have options for magnetic starters and remote control. Single phaseelectric motors are available for blowers up to 7.5 horsepower.Magnetic starter included.See comparison chart below for specific...
AMXmachinery1
ESPIGADORA SENCILLA - 1 LADO
PARTE: 2CK-ST152C - ESPIGADORA SENCILLA
- 1 LADO
NUEVO CON GARANTIAOffers superior tenoning results in a economical solution. The 12” trim saw unit is mounted in front of the tenon heads and enables stock to be cut to the desired length. The two horizontal spiral insert knife tenoning heads are capable of producing a tenon up to 6” long. The heads are accurately adjusted using mechanical digital readouts. The spiral insert heads produce an extremely smooth finish result. The tw...
-500x500.png)
AMXmachinery1
CEPILLO DE ALAMBRE - 2 CABEZAS
PARTE: 2CK-BS600-2H - CEPILLO DE ALAMBRE - 2 CABEZASProduce distressed wire brush flooring and paneling with ease!Is designed to remove the soft grain between the growth rings to produce distressed wood flooring, paneling, and more. Following the wire brush head is a nylon brush that is designed to remove any raised fibers that appear from the wire brushing. With variable frequency inverters to control the brush RPM and feed speed you have ultimate control over your finished aesthetic.Ergonomi...