ID: 2815
Open
Listing ID: #2815 has been added to your wishlist.
Description
PARTE: 2SS-SPM301HD - TALADRO BASTIDOR - 1 BROCA
Pocket-hole joinery for high production woodworkers made easy with our Screw Pocket Machine. This machine allows for simultaneously drilling a pilot hole and machining a screw pocket in under a second.
A two-in-one motion simultaneously drills a six degree pilot hole and machines a screw pocket in under a second on most wood species. Features a heavy-duty, direct drive continuous electric spindle motor, allowing for continuous pocketing production. Features cam-driven action providing fast, smooth cutting action under complete mechanical control throughout the machine cycle. The new pilot air drill and end mill produce superior low-angle 6 degree screw pockets. Requires standard 220V and 6.2 CFM at 90 PSI based on 25% load factor, 25% duty cycle.
Additional Accesories
An extension table can be added
| Weight | 350 lbs |
|---|---|
| Dimensions | 32 x 22 x 44in |
| Crated Dimensions | 36" × 28" × 49" |
| Vacuum Diameter Required | 3" Hose Connection |
| Vacuum CFM Required | 220 CFM |
| Air Requirement | 6.2 CFM at 90 PSI |
| Spindle Motor | 5 amp/18,000 RPM, 3/8" (ER20) Collet |
| Screw Pocket Angle | Six Degrees |
| Spindle Motor Amps | 5 amps |
| Spindle Motor Collet | 3/8” Collet |
| Spindle Motor Max RPM | 18,000 |
| Air Drill | .7HP |
| Air Drill Collet | 1/4" Collet |
| Air Drill Max RPM | 25,000 |
| Screw Pocket Depth Range | .5" to 1.5" |
| Country of Origin | USA |
Payments & Returns
- Payment Methods
- N/A
Post Message
Sign in to ask the seller a question.
-500x500.png)
AMXmachinery1
CABEZAL DE CORTE ESPIRAL PARA FRESADORA DE HUSILLO
PARTE: 3CH-FCB - CABEZAL DE CORTE ESPIRAL PARA FRESADORA DE HUSILLOStraight bore that can be fits in general spindle shapers.Choice of steel or aluminum body.Choice of TCT knife bit size 14*14*2.0mm and 50*12*1.5mm.
-500x500.png)
AMXmachinery1
FINGER JOINT AUTOMATICA
FINGER JOINT AUTOMATICA PARTE: 2CK-FL03Is a cutting-edge fully automatic finger jointing production line, designed to efficiently convert wood waste into valuable materials while maintaining an excellent performance-to-cost ratio. With its innovative technology, this system offers remarkable value in terms of both performance and price, the entire machining procedures from workpiece in-feed, left and right shaping to jointing is fast, smooth and accurate. The whole production line i...
-500x500.jpg)
AMXmachinery1
PARTE: 2TA-GS-36RO2 - ENGOMADORA 2 LADOS – CAPACIDAD ANCHO 36”
PARTE: 2TA-GS-36RO2 - ENGOMADORA 2 LADOS – CAPACIDAD ANCHO 36”
Nueva con garantíaRoller coaster type are efficiently & effectively apply glues with a minimum of setup and easily maintained.Set of three rolls (one doctor roller) for top-only or four rollers (two doctor roller) for top and bottom glue application.We designed our glue spreaders with high quality grooved rubber glue rollers with hardened rubber doctor rolls for durability usage.Stainless drip pan catches the over spread glue...
-500x500.png)
AMXmachinery1
ARMADORA DE GABINETES
PARTE: 2RI-R450V - ARMADORA DE GABINETESIs designed for high and low volume production requirements. Is the smallest version of our heavy duty cabinet door clamping tables. In this system the operator is freed from the task of managing individual bar or pipe clamps, and instead, uses pneumatic clamp cylinders to apply pressure to the glue line. Each cylinder is easily operated by a slide toggle, and the entire system is activated by a foot pedal. The vertical easel allows for fast and square ass...