Identificador: 2840
Abierta
ID de articulo : # 2840 se ha agregado a su lista de deseos.
.PNG)
.PNG)
Descripción
PARTE: 2MK-CP/2.C - COLECTOR DE POLVOS - 2HP
Is ideal for collecting light powder from small and medium machines such as saws and sanders. The air flow of this collector is 1,165 ft³/min, resulting in a clean and pleasant environment for your work. The large bag has a capacity of 5.4 sq. feet.
| Technical Information | |
|---|---|
| Motor Specs | 1 Phase 220V 2HP 15 Amps 60Hzs |
| Air Flow capacity | 1490 CFM |
| Fan Diameter | 12" | 305mm |
| Bag Capacity | 5ft3 |
| Number of air intel | 2 |
| Inlet size | Main:5" |125mm - Spliter: 4" | 100mm |
| Filtration | 1 micron |
| Sound Rating | 89 dB |
| Weight | 95 Lbs | 43kg |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
LIJADORA DE BANDA VERTICAL HEAVY DUTY - 7.5 HP
PARTE: 2CK-OES509DIs the ideal edge sander for demanding applications for production use. Equipped with a 9” high oscillating sanding belt, it is ideal for sanding drawer boxes, doors, furniture components and more. Is also equipped with dual front and rear tables which are adjustable up & down and can be tilted to 45 degrees, allowing for a wide range of applications and for full utilization of the sanding belt. The dual tables also allow for two operators to be working on the machine a...
AMXmachinery1
SIERRA MULTIPLE - RODILLOS - PIEZAS CORTAS
PARTE: 2CK-131HMMAIN FRAME, MACHINE BED & ENCLOSURE1 Piece – Extra Heavy 1 Piece Main Frame. Specially heat treated for maximum stability and minimum vibration43” (1.1 meter) long Adjustable Infeed Table (adjustable .4 inch) – measured from Btm. Head Infeed Bed Plate – head endAll Bedplates, Tables and Fences are Hard ChromedLift up sound and safety Enclosure including safety interlocks and good lightingDRIVE INCLUDESMaintenance free Full Cardan Shaft Drive to feedworks for balanced dr...
-500x500.png)
AMXmachinery1
TORNO 26 x 160''
TORNO 26 x 160'' PARTE:2GM-GML-26160Heavy Duty Precision Gap Bed Lathe 26” x 160”, 4-1/8” Bore, 15HP Motor.ISO 9001 certifiedLarge spindle bore 4-1/8”Heavy Duty spindle D1-8Heavy Duty guideway width 16”Heavy Duty main motor 15HP16 spindle speeds from 25-1,600 rpm, 16 speeds54 kinds of inch threads, and 54 kinds of metric threadsThreading and feeding rate change without changing gearsSpindle is balanced, hardened and precision groundSpindle i...
AMXmachinery1
LIJADORA DE BANDA ANCHA - ARRIBA Y ABAJO
PARTE: 2CK-SU/SBIs designed for in-line or stand-alone operations. Suitable for double-sided processing solid wood or sealer sanding applications is built to exacting standards to sand multiple surfaces generally in one pass to achieve outstanding results with maximum efficiency. Is available with multiple configurations with 1-4 sanding units and widths of 24”, 36”, 43”, and 51”. Sanding units can be rubber or steel contact drums, combination sanding units (drum/platen), or wire brush h...