Identificador: 2842
Abierta
ID de articulo : # 2842 se ha agregado a su lista de deseos.
.PNG)
.PNG)
Descripción
PARTE: 2MK-CBR.TPM - ENCHAPADORA DE CANTOS
SAE METRIC
Combines precision and efficiency with a compact design, making it ideal for workshops with limited space. It features pre-milling, a gluing unit, a multi-function group for end trimming and top & bottom trimming, glue scraping, buffing, and vertical rounding for versatile performance. Equipped with a touchscreen panel, this machine ensures ease of operation and delivers a flawless finish. Each high-frequency motor is controlled by an independent electronic converter.
Pre-milling in a small footprint
- Edge Tape: 0.4-2 mm
- Panel Thickness: 10-40mm
- 1 Phase 220V 60Hz
- Glue Scraper Unit
- Buffing Unit
- End Trimming HF Motor
- Pre-milling Unit 1 HF Motors
- Glue Pot Capacity 0.5kg | 1lbs Teflon Coated
- Automatic feeding Speed 21 ft/min
- Net Weight 1146 Lbs | 520 kgs
- Compact Design
- Melamine/PVC/ABS/PP
| Electrical Requirement | 1 Phase 220V 30 Amps 60 Hz |
| Conveyer Motor | 60 Hz 1390 RPM .66 kw |
| Top/Bottom Trimmer HFM | 200 Hz 12,000 RPM .27kw |
| End Trimmer Motor | 200 Hz 12,000 RPM .27kw |
| Front/Rear Pre-Milling HFM | 150 Hz 9000 RPM .75/.25Kw |
| Top Buffing Motor | 60 Hz 1680 RPM .11kw |
| Bottom Buffing Motor | 60 Hz 1680 RPM .11kw |
| Sound Rating | 80 dB |
| Automatic Feeding speed | 21 ft/min | 6.5 m/min |
| Panel thickness Min/Max | - | 10 - 40 mm |
| Max Pre-milling Height | 1” | 30 mm |
| Edgebanding thickness | 0.0157" - 0.07" | 0.4-2mm |
| Glue Pot Capacity | 1lbs | 0.5 kg |
| Max Edgebanding Height | 1" | 30 mm |
| Minimum panel width | 4 3/4" | 120 mm |
| Minimum panel length | 7 7/8" | 200 mm |
| Extendable Panel Support Rail Length | 83 1/2" | 2122 mm |
| Extension table Max Width | 10" | 257 mm |
| Size of Dust Collector Ports | 5" | 127mm |
| Minimum Dust Collection Requirements | 1236 CFM | 2100 m3/h |
| Air Pressure Requirement | 7 SCFM @ 90 PSI | 0.7 Mpa 200 L/min |
| Edgebanding coil Support Diameter | 59" | 1498 mm |
| Recommended Glue Temperature Range | 356°F - 410°F | 180°C - 210°C |
| Max. machine dimensions (LxWxH) | 93 1/2”x 40 13/16”x 53” | 2376 x 1028 x 1347 mm |
| Net weight | 1146 LBS | 520 KGS |
| Shipping dimensions (LxWxH) | 91” x 30” x 57” | 2320 x 760 x 1448 mm |
| Glue Type | Granulated Hot-Melt EVA | Granulated Hot-Melt EVA |
| Electrical Information | 1 Phase 220V 30 Amps 60Hz | 1 Phase 220V 30 Amps 60Hz |
| Sound Rating | 80 dB | 80 dB |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.png)
AMXmachinery1
TRANSPORTADOR DE RETORNO
PARTE: 2DO-BT3 - TRANSPORTADOR DE RETORNO1 Edge bander + 1 Return Conveyor = 1 fully productive operator, a
streamlined workflow, less handling damage, less rejects… Unlike their human counterpart, an automated
system needs no hiring, no training, does not take off sick and works extended
hours without receiving extra money. This is true for all Return Conveyors
installed on shaper/sanders, single end tenoners, planers and wide belt
sanders.Operating Principle: Its receiving rollers ar...
-500x500.png)
AMXmachinery1
MESA DE MONTAJE - MARCO FRONTAL
PARTE: 2RI-R200E/A - MESA DE MONTAJE - MARCO FRONTALScrewed together face frame construction provides for the most efficient and economical methods for joining frames. Flush and tight joint construction is provided for all types of wood. Elimination of dowel boring and insertion, clamping time and joint misalignment provide up 50% time reduction in frame production. The ability to disassemble and reposition a joint creates less loss of material in case of errors in the joint location. No glue re...
-500x500.png)
AMXmachinery1
ESPIGADORA HORIZONTAL
PARTE: 2PI-HP5D - ESPIGADORA HORIZONTALIs designed to machine parts used in TFL (thermally fused laminate), TFM (thermally fused melamine), paper wrapped, vinyl wrapped or thermofoil doors.Is a horizontal point to point bore and dowel insertion and panel groove machining center. It is designed to CNC position a drill spindle, bore a hole, then CNC position the dowel inserter, inject glue or water (for pre-glued dowels), and insert the dowel into the hole. As well as cut a panel groove in the cen...
AMXmachinery1
AFILADORA PARA SIERRA DE VAIVEN - BANDA RECTA
PARTE: 2TA-TG-225B - AFILADORA PARA SIERRA DE VAIVEN - BANDA RECTAFEATURESA Peripheral Equipment for Frame SawDesigned to Maximize Blade Service Life While Minimizing Blade Consumption.The wet grinding feature assures extremely fine finish on teeth surfaces and greatly extends cutting period of saw blade.Very precise grinding module.Exact guiding of saw blades guarantees a minimum satellite loss.Grinding amount adjustment is accurately indicated by dial gauges.Variable grinding speed is con...