Identificador: 2855
Abierta
ID de articulo : # 2855 se ha agregado a su lista de deseos.
.PNG)
Descripción
PARTE: 2MK-LD.300 - LIJADORA DE DISCO - 1 HP
Is ideal for shaping and smoothing edges, squaring end-cuts and truing simple and compound miters. The precision ground cast iron table adjusts for bevel sanding up to 45-degrees and the 1 HP totally enclosed fan cooled direct drive motor spins at 1,700 RPM, which is ideal for wood sanding applications.
Miter Gauge
This sander includes a deluxe miter gauge for moving workpieces into the sanding disc at a specific angle. To use the miter gauge simply slide it into the miter slot, loosen the lock knob, set the angle, then re-tighten the knob.
Degree Scale
The easy-to-read degree scale lets you know your exact sanding angle for precision and accuracy
| Technical Information | |
|---|---|
| Table size | 6" x 17-1/2" |
| Table tilt | 0º to 45º |
| Speed | 1,750 RPM |
| Motor Specs | 1 HP 1Phase 110 V – 7.5A 60Hz |
| Weight | 86 Lbs. |
| Disc Diameter | 12” |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
CENTRO DE MAQUINADO - EVOLUTION FLEX CNC
PARTE : 2JG-MAG-EVOLUTIONFLEX - CENTRO DE MAQUINADO - EVOLUTION FLEX CNCAccurately routes, drills, and grooves from underneath with automatic operator return or can be unloaded from the back.This machine is designed for one man operation and practically zero set-up timeIt is capable of routing, boring both vertically and horizontally, and for hinge holes, while also providing a grooving sawIt has an integrated control panel with an industrial PC using Windows Operating System, 17" color moni...
-500x500.png)
AMXmachinery1
TALADRO MULTIPLE - 32 MM - 21 CABEZALES
PARTE: 2CK-JB21P - TALADRO MULTIPLE - 32 MM - 21 CABEZALESIs designed to speed up your line drilling operations. It has a total of 21-spindles based on a 32mm centers. The spring-loaded index pin allows for accurate and convenient continuous line drilling operations. The precision rear aluminum fence with linear scale and (2) flip stops allow for precise and convenient setup. The complete back fence can be adjusted for various measurements from the edge of the panel to the holes. The p...
-500x500.png)
AMXmachinery1
CORTADORA 4 PIES
PARTE: 2GM-EPS-0412M-1PH - CORTADORA 4 PIES Shop our 4 foot mechanical shears that are capable of cutting up to 12 gauge mild steel and 16 gauge stainless. Our sheering machines are designed as a low maintenance design with an array of features that will add value to any machine shop. ISO 9001 certifiedAmerican design and Taiwan quality machineHD all steel construction for maximum rigidityPrecision driven gearboxFull length 30 strokes per minute60” long squa...
AMXmachinery1
SIERRA MULTIPLE - ALIMENTACION RODILLOS
PARTE: 2CK-SYC300Has been designed to ensure uncompromised results specifically aimed to the company looking to run strip materials like lath, dunnage, stakes, and more. The roll feed design will rip for maximum material yield which helps increase output and margins.Roll feed design achieves maximum yield from the materialHeavy frame ensures smooth running to allow thin cutting of materials like lathFull width top and bottom driven feed rolls assist in smooth feeding of a range of materials ...