Identificador: 2908
Abierta
ID de articulo : # 2908 se ha agregado a su lista de deseos.
.PNG)
Descripción
PARTE: 2RI-R701 - LIJADORA DE BANDA - 4"
Description:
Designed for use with edge finishing devices common to the furniture and custom woodworking industry. The ability to use the machine for a variety of edge finishing applications makes this the industry’s most universal edge belt sander.
Standard Features:
- Double Sided Ground Steel Platen
- Bias Tilting Tables
- Full Dust Hood with 4" End Openings for Dust Collection
- Pedestal Base
- Controls Accessible From Both Sides
- Magnetic Controls
- End Sanding Kit with 3" x 3" Sanding Drum
- Tiltable End Table
Technical Data and Specifications:
- Belt Size: 4" x 132"
- Platen Size: 4" x 49"
- Drive Wheel: 6" x 4"
- Drive Motor R701: 1.5 HP
- Drive Motor R703: 2 HP
- Electrical R701: 230V, 1Ø, 60Hz
- Electrical R703: 230V, 3Ø, 60Hz or 460V, 3Ø, 60Hz
- Air: N/A
- Work height: 36.5″
- Footprint: 31.5" x 80″
- Table Area: 12″ x 65″
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.png)
AMXmachinery1
BARRENADORA HORIZONTAL DOBLE
PARTE: 2RI-R8023 - BARRENADORA HORIZONTAL DOBLEDescription:Was designed for heavy-duty production boring applications. Spindles are designed with multiple bearings to avoid spindle drift and fatigue. Spindle centers are easily adjusted to accommodate multiple spindle boring patterns. The fixed table work height easily accommodates electronic and manual material stop systems and tables. The spindle height above the table is adjusted from the front of the machine for easy operator access.Standar...
-500x500.png)
AMXmachinery1
LIJADORA CALIBRADORA 43" - BANDA ANCHA - 1 LIJA
PARTE: 2SS- WBS4375101 - LIJADORA CALIBRADORA 43" - BANDA ANCHA - 1 LIJAOffering woodworkers a maximum sanding width 43″, and available in single or three phase power, this American Made Wide Belt Sander will likely outlive you.Main Motor Options10 Hp, Single Phase (1~), 220 Volt 20 Hp, 3 Phase (3~), 208 Volt / 230 Volt 460 Volt, 3 Phase (3~), 20 HpThe 43″ Wide Belt Sander features a 75” belt, providing 25% more abrasive surface than the smaller 60” belt machines. The larger belt trans...
AMXmachinery1
PARTE: 2CK-J127LH - CANTEADORA - 12" ANCHO
PARTE: 2CK-J127LH - CANTEADORA - 12" ANCHOIs a truly industrial long bed jointer capable of producing perfectly jointed material used in the production of wood furniture, doors, face frames. and more. The heavy-duty cast iron infeed & outfeed table and back fence provide superior vibration damping which results in an optimum jointed finish. The spiral insert cutterhead with its two-sided solid carbide inserts provides optimum stock removal with a superior finish. The insert knife cutterhe...
-500x500.png)
AMXmachinery1
ESPIGADORA HORIZONTAL
PARTE: 2PI-HP5D - ESPIGADORA HORIZONTALIs designed to machine parts used in TFL (thermally fused laminate), TFM (thermally fused melamine), paper wrapped, vinyl wrapped or thermofoil doors.Is a horizontal point to point bore and dowel insertion and panel groove machining center. It is designed to CNC position a drill spindle, bore a hole, then CNC position the dowel inserter, inject glue or water (for pre-glued dowels), and insert the dowel into the hole. As well as cut a panel groove in the cen...