Identificador: 2912
Abierta
ID de articulo : # 2912 se ha agregado a su lista de deseos.
.PNG)
Descripción
PARTE: 2RI-R258 - LIJADORA DE BANDA - 8"
Description:
The entire platen assembly raises and lowers to give the operator use of the entire belt surface. Designed for use with edge finishing devices common to the furniture and custom woodworking industry. The ability to use the machine for a variety of edge finishing applications makes this the industry’s most universal edge belt sander.
Standard Features:
- Single Sided Ground Steel Platen
- 6-Way Adjusting Front Table
- Swing Away Safety Dust Hood with 6" End Openings for Dust Collection
- Adjustable Oscillation Stroke Cam
- Dry-Lin Oscillation Ways
- Air-Jet Belt Cleaning Device
- Tiltable End Table
- Magnetic Controls
- Oscillation/Non-Oscillation Selector Switch
Technical Data and Specifications:
- Belt Size: 8" x 144"
- Platen Size: 10" x 56"
- Oscillation: 0"- 1" Adjustable
- Drive Wheel: 7.75" x 9"
- Drive Motor: 7.5 HP
- Oscillation Motor: 0.25 HP
- Electrical: 230V, 3Ø, 60Hz or 460V, 3Ø, 60Hz
- Air: 40-60 PSI
- Work height: 36″
- Footprint: 26.5" x 87″
- Table Area: 12″ x 56″
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
ALIMENTADOR - REASERRADORA
PARTE: 2CK-AF19NIs designed to allow consistent and automated feeding of material through vertical bandsaw or resaws. Is pneumatically actuated by a switch in the fence so no foot pedal is required making for a simple and convenient operation. With 10 feed speeds to choose from you can dial in the optimum feed speed for your material. Intended to be fit on bandsaws which are over 24” but could be fitted on smaller bandsaw tables, but may require an extension off the side of your bandsaw ...
-500x500.jpg)
AMXmachinery1
ASTILLADORA - HORIZONTAL - 15 X 4 PULGADAS - CON BANDA TRANSPORTADORA
PARTE: 2TA-WG-1504HC - ASTILLADORA - HORIZONTAL - 15 X 4 PULGADAS - CON BANDA TRANSPORTADORAFeatures:A specially designed, powerful crusher for different materials such as wood, MDF, particle board,plastic, rubber, corn cob, etc.Excellent wearing ability and impact-resistant for time & labor saving.Large busting capacity and easy feeding system.The shaft rest for the cutter head is constructed by round hollow with special angle to keep cooling for long hours' usageCutter head angle cuttin...
AMXmachinery1
CEPILLO 1 CARA - 20 PULGADAS
PARTE: 2CK-P508HVHas a solid steel helical cutterhead with two-sided carbide knife inserts that require no adjustments when changing. With a digital readout and simple PC controller, setting the table height is quick, accurate, and easy. The frame is made from heavy cast iron with known vibration damping resulting in long bearing life and superior cut quality. The planer’s segmented, serrated infeed roll & segmented pressure shoe ensures material is held firmly during the feeding and planing p...
-500x500.png)
AMXmachinery1
LIJADORA CALIBRADORA 43" - BANDA ANCHA - 1 LIJA
PARTE: 2SS- WBS4375101 - LIJADORA CALIBRADORA 43" - BANDA ANCHA - 1 LIJAOffering woodworkers a maximum sanding width 43″, and available in single or three phase power, this American Made Wide Belt Sander will likely outlive you.Main Motor Options10 Hp, Single Phase (1~), 220 Volt 20 Hp, 3 Phase (3~), 208 Volt / 230 Volt 460 Volt, 3 Phase (3~), 20 HpThe 43″ Wide Belt Sander features a 75” belt, providing 25% more abrasive surface than the smaller 60” belt machines. The larger belt trans...