Identificador: 2922
Abierta
ID de articulo : # 2922 se ha agregado a su lista de deseos.
.jpg)
Descripción
PARTE: 2EX-DC-3100 - COLECTOR DE ASERRIN - 10 HP, 3 FASES, 230V
Nuevo con garantía
Amps: 27A @ 220V
Cfm: 5000
Dimensions: 112″ x 110″ x 32″
Fan rpm: 3450
Fan size: 14″
Filter-bags: 3
Filter area: 99
Horsepower: 10HP
Inlet-size: 12″
Phase: 3
Storage capacity: 36
Weight: 520 lbs
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12665 - MOLDURADORA - 4 CABEZALES - QUALITY
PARTE: 12665 - MOLDURADORA -
4 CABEZALES - MARCA QUALITYUSADA - BUENAS CONDICIONES2 MOTORES DE 5 HP2 MOTORES DE 3 HP1 MOTOR DE 2 HP - ALIMENTADOR
220V, 3 FASES
HECHA EN TAIWAN
AMXmachinery
BRIQUETEADORA PARA MADERA - 7.5, 10 HP
PARTE:
4GR-G2-50 - BRIQUETEADORA PARA MADERA - 7.5, 10 HP
NUEVA CON
GARANTIAVolume reduction and production of heating material Developed for chips and dusts especially. These
high-performance, robust and high-quality machines compress homogenous material
to form com-pact briquettes. Due to its highly effective hydraulic system,
their wattage is extremely low considering their briquetting output.The machine is extremely silent, requires only little room
and can be set up almost anywher...
AMXmachinery
MEDIDOR DE HUMEDAD PARA MADERA – CON 2 PINS - LIGNOMAT – MINI-LIGNO E/D
PARTE: 2LI-ED-0 - MEDIDOR DE HUMEDAD PARA MADERA – CON 2 PINS - LIGNOMAT – MINI-LIGNO E/DNuevo con garantíaMeasuringRange6-45%DisplayBright LED display with 0.1% resolution below 10% and 1% steps above 10%. Lifetime warranty for the most durable display.SpeciesCorrections2 Wood groups for softwoods and hardwoods, wood-based panel productsCalibrationStable calibration not affected by ambient temperature. Calibration is internally checked and automatically adjusted if necessary. All mini-Li...
AMXmachinery
PARTE: 12474 - PINCH ROLLER - EVANS
PARTE: 12474 - PINCH
ROLLER - EVANS
USADA - BUENAS CONDICIONES
Safety Gates on In-Feed and Out-Feed
Solid Top and Bottom Rollers
Feed Rate: 50’ FPM
Maximum Width: 62”
Maximum Thickness: 2”
Thickness adjustable by spacers
Work Height: 30-1/2”
Drive Motor: 1/2 HP
Electrical: 120 V, 1 PH,
60 Hz
Air Requirement: 100 PSI