Identificador: 2925
Abierta
ID de articulo : # 2925 se ha agregado a su lista de deseos.
.PNG)
Descripción
PARTE: 2PI-M45 - ESPIGADORA Y MORTAJADORA
Is our entry level miter, mortise, and tenon machine. One of our most popular wood cnc machines that features side pressure clamps to ensure the part is firmly against the side fence prior to clamping. This guarantees a perfect 45˚ miter every time. Will produce 150-175 doors per shift.
- Elimination of complicated machine setups climb cut of both tenon and mortise cuts for a “tear out” free cut.
- The ability to cut MDF paper or vinyl wrapped profiles.
- Eliminates the need for applying inlays.
- Reduces the maintenance and cost associated with the tooling by more than 50% by eliminating end coping.
- Eliminates the need for outside profiling or sanding the edges of doors
- Eliminates the need for sanding the face of the doors
- Both stiles and rails are run face down for consistency of machining.
- Self aligning joints
- There is a more durable and aesthetically pleasing blind joint (no visible joint on edge of board)
- Multiple tool paths to choose from in tenon and miter (on the mortise side) to accommodate all profiles.
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.png)
AMXmachinery1
BARRENADORA HORIZONTAL - 4 HUSILLOS
PARTE: 2RI-R8043 - BARRENADORA HORIZONTAL - 4 HUSILLOSDescription:Was designed for heavy-duty production boring applications. Spindles are designed with multiple bearings to avoid spindle drift and fatigue. Spindle centers are easily adjusted to accommodate multiple spindle boring patterns. The fixed table work height easily accommodates electronic and manual material stop systems and tables. The spindle height above the table is adjusted from the front of the machine for easy operator access....
-500x500.jpg)
AMXmachinery1
LIJADORA DE BANDA VERTICAL HEAVY DUTY - 10 HP
PARTE: 2CK-OES512DIs the ideal edge sander for demanding applications for production use. Equipped with a 12” high oscillating sanding belt, it is ideal for sanding drawer boxes, doors, furniture components and more. The OES512D is also equipped with dual front and rear tables which are adjustable up & down and can be tilted to 45 degrees, allowing for a wide range of applications and full utilization of the sanding belt. The dual tables also allow for two operators to be working on the mach...
-500x500.png)
AMXmachinery1
PARTE: 2GM-HS-1214M - GUILLOTINA MECANICA - 12 PIES LARGO X 14 GA
PARTE: 2GM-HS-1214M - GUILLOTINA
MECANICA - 12 PIES LARGO X 14 GA ISO 9001 certifiedTaiwan machinesQuick Change Blade Gap AdjustmentCE standard “OMERO” electric control systemMeet OSHA safety standard codeShadow line for accurate straight cuttingAdjustable cutting length and strokeBall transfer plates on worktable for easy loading workpieceWell balanced and sturdy all steel machine frameGerman made Hydraulic logic system centrally located and quietHydraulic hold-downs with anti-mar neopren...
AMXmachinery1
ROLADORA DE METAL
ROLADORA DE METALIs a heavy-duty, affordable, production tool for forming curved parts and tubes in 16-gauge and lighter sheet metal. The roll has three gear-driven rolls that ensure even starting and feeding of materials. The gearing features a 4:1 reduction ratio for ease of operation of heavy materials. All gears are fully enclosed for safety and protection from the elements. The roll drive is controlled by a toggle-action, shrouded foot switch for instant forward and reverse action. The driv...