Identificador: 3073
Abierta
ID de articulo : # 3073 se ha agregado a su lista de deseos.
.PNG)
Descripción
PARTE: 3HO-HT330 - SIERRA DE PANELES CNC
Designed for high-quality batch cutting of laminated chipboard and fibreboard.
| Cutting Length(mm) | 2800 | 3300 | 3800 |
|---|---|---|---|
| Cutting Thickness(mm) | 90 | ||
| Main Blade Diameter(mm) | φ400 | ||
| Main Shaft Diameter(mm) | φ30 | ||
| Main Blade speed(rpm) | 4800 | ||
| Scoring Blade Diameter(mm) | φ180 | ||
| Scoring Shaft Diameter(mm) | φ30 | ||
| Scoring Blade speed (rpm) | 6500 | ||
| Saw Group Forwarding speed(m/min) | 0~100 | ||
| Saw Group Backwarding Speed (m/min) | 60 | ||
| Feeding Speed(m/min) | 60 | ||
| Main Saw Motor Power(kw) | 16 | ||
| Driving Motor Power(kw) | 3 | ||
| Feeding Motor Power(kw) | 1.5 | ||
| High Pressure Air Blower(kw) | 2.2 | ||
| Air pressure(Mpa) | 0.5-0.6 | ||
| N.W.(kg) | 3900/4260/4860 | ||
| Overall size(mm) | 5990x5200x1800/6590x5900x1800/6590*6400*1800 | ||
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.png)
AMXmachinery1
LIJADORA DE DISCO
PARTE: 2MK-LD.300 - LIJADORA DE DISCOPrecision sanding for small projects.Is perfect for shaping and smoothing edges, squaring end-cuts, and truing simple or compound miters.Its precision-ground cast iron table adjusts up to 45° for bevel sanding, while the 1 HP enclosed direct-drive motor spins at 1,700 RPM for optimal wood sanding performance.
-500x500.png)
AMXmachinery1
SIERRA CINTA - ALIMENTADOR - 1 HP
PARTE: 2LO-ST-18BFS - SIERRA CINTA - ALIMENTADOR - 1 HPEliminate hand feeding and increase the efficiency of straight cutting operations.The feed direction is reversible and the infinitely variable feed speed makes it possible to feed all types of wood for smooth cutting.If required, the roll surface can be laminated with rubber to prevent the scratching of workpiece surfaces. 6" L x 6-1/4" Dia. Roller, 8-5/8" max. width of feed, 16 ~ 66 FPM Var. feed speed, 1HP, 250 LBS.
-500x500.png)
AMXmachinery1
HORNO DE AIRE CALIENTE
PARTE: 12739 - HORNO DE AIRE CALIENTE Tested and works as it should.208V OnlyDrive bar roller styleConveyor is 69" Long
-500x500.png)
AMXmachinery1
DOBLADORA DE METAL 5' X 10GA
PARTE: 2GM-0510E - DOBLADORA DE METAL 5' X 10GA This machine has a 3HP Motor, rated at 220V three phase. Power bending roll up/down with push button & display.SO 9001 certifiedTaiwan machinesAll (3) rolls are hardened rolls, up to 50-52 HRC3-rollers are driven to perform high accuracyAdjustable cone attachment included3/8”, ½” and 5/8” grooves on rollersOne wheel one-side operated for bending rollOne wheel one-site operated for pinch roll (E model is...