Identificador: 3118
Abierta
ID de articulo : # 3118 se ha agregado a su lista de deseos.
.PNG)
Descripción
PARTE: 4ST-FAST 500 MATRIX - SIERRA OPTIMIZADORA - CORTES RECTOS
AUTOMATIC HIGH SPEED CROSSCUT SAW WITH ELECTRONIC PUSH-FEED
MATRIX, A STROMAB PHILOSOPHY
Is a crosscut saw electronically pusher-controlled with complete optimisation and defection of wood.
An optimal solution for all requirements in 90° up-cutting, it can work with either single bar and stack.
Thanks to its specific cutting unit, it can perform a cutting cycle in 2 seconds and in relation to the cutting list
can produce up to 40% more than the standard machine.
The push-feed is built with a rack and pinion feed system and brushless motor to ensure
uncompromised positioning and maximum cutting precision.
The software architecture relies on an electronic programmer with a high-resolution 12’ touch-screen monitor,
simple and intuitive graphic interface with Linux operating system.
The cutting lists can be created directly on the software on board the machine or imported via connection
to Ethernet or USB network ports.
The software allows automatic optimisation of the cutting list to reduce waste and optimise the machining process
according to 6 criteria: maximum length, minimum waste, sequence, table sequence, volume and priority.
A photocell allows automatic measurement of the workpiece to be cut (OPTI function).
A second photocell detects fluorescent marks for the elimination of knots and defects (OPTI PLUS function).
Possibility of integrating label and ink-jet printers into the cutting line.
Automatic loading and unloading systems can be implemented on request.
Clear choices for complex solutions.
Technical specifications Cutting unit
Blade diameter
- 500 mm
Blade rotation speed
- 3500 rpm
Blade motor power
- kW 7,5 (HP 10)
Blade driving
- Pneumatic Automatic
Working table height
- 1000 mm
Working table inclination
- 8°
Minimum crosscutting section
- 20 x 10 mm
Max operating pressure
- 6-8 bar
Extraction outlets
- 2 x Ø100 mm
Net weight
- 1900 kg
Technical specifications Push-feed
Loading Capacity
- from 2000 upto 14000 mm
Maximum speed
- 90 mt / min
Max positioning speed
- 90 mt / min
Max return speed
- 90 mt / min
Positioning accuracy
- +/- 0,4 mm
Max boards weight
- 80 kg
Cutting execution cycle
- 2 seconds
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.png)
AMXmachinery1
SIERRA TRONZADORA
PARTE: 4ST-TR 600 - SIERRA TRONZADORACUT OFF SAWS WITH ASCENDING BLADECLASSIC TOOLS FOR SAWINGIs a cut off saw that was born out to meet the crosscutting needs of large industries.Thanks to its robustness, a hydraulic saw unit drive with bimanual hand-saving controlto a motor power of 9 kW and a 600 mm diameter blade it can cut up to 160 mm thick and 610 mm wide.Technical specifications Cutting unit Blade diameter600 mmBlade rotation speed3000 rpmBlade motor powerkW 9 (HP 12,5)Blade drivingTwo...
-500x500.png)
AMXmachinery1
LIJADORA DE BANDA ANCHA - 3 BANDAS - 43" ANCHO
PARTE: 2EX-XS-3P43 - LIJADORA DE BANDA ANCHA - 3 BANDAS - 43" ANCHO43" 30 / 30 / 25 HP Performa Series Wide-Belt Sander75″ Belt LengthOver thickness safety deviceInfeed bed rollersDigital thickness controllerIndividual amp metersDisc brakes on sanding headsTelemecaique electricsCamozzi pneumaticsVariable speed drive systemSpecificationsHorsepower: 30/30/25HPVoltage: 230V or 460VPhase(s): 3PHBelt Size: 43" x 75"CFM Requirement: 6300Main Motor: 30 / 30 / 25 HPFeed Motor: 3 HPElevation Motor: 0....
AMXmachinery1
ROLADORA DE METAL
ROLADORA DE METALIs a heavy-duty, affordable, production tool for forming curved parts and tubes in 16-gauge and lighter sheet metal. The roll has three gear-driven rolls that ensure even starting and feeding of materials. The gearing features a 4:1 reduction ratio for ease of operation of heavy materials. All gears are fully enclosed for safety and protection from the elements. The roll drive is controlled by a toggle-action, shrouded foot switch for instant forward and reverse action. The driv...
-500x500.png)
AMXmachinery1
DOBLADORA DE METAL 4' X 12GA
PARTE: 2GM-0412E - DOBLADORA DE METAL 4' X 12GA This machine has a 2HP Motor, rated at 220V/440V three phase. Power bending roll up/down with push button & display.SO 9001 certifiedTaiwan machinesAll (3) rolls are hardened rolls, up to 50-52 HRC3-rollers are driven to perform high accuracyAdjustable cone attachment included3/8”, ½” and 5/8” grooves on rollersOne wheel one-side operated for bending rollOne wheel one-site operated for pinch roll (E model is ...